How To Link Your Computer To The Printer

How to link an HP PC to the printer

To set up the office printer on a new laptop, firstly click (or type - NOTE case sensitive) this link: 64bit - Click here to view
Scroll down to the bottom and tick the box to the left of I have read and understood the information above, and wish to download the designated software
Click on the Download link that appears underneath the tick box. The downloaded file will appear on the bottom left of your screen, once that has finished - click that to unzip the file.
Once the file has unzipped - go to the downloads file on your computer.
Open the UFRII_Driver_V3015_W64_ukEN_00 yellow folder.
Double click the Setup Application.
A new window will appear.
On the License Agreement page, select Yes
On the Printer Setup page, select Custom and then Next >
On the Select process page, select Next >
On the Select Printers to Install page, select Canon iR-ADV C2220/2230 UFR II and then Next >
On the Printer Information page, select Add Port...
A new window will appear.
On the Add Port page, select Standard TCP/IP Port and then OK
A new window will appear.
Select Next >
In the Printer name or IP address field, type 192.168.20.95
Select Next >
Select Finish (the window will close).
On the Printer Information page in the Printer Name: field where it says Canon iR-ADV C2220/2230 UFR II, select this all of the text Canon iR-ADV C2220/2230 UFR II, delete it and type Strictly Savvy
On the Printer Information page, select the Set as Default tick box underneath Printer Name:
Select Next >
On the The setup program will install the drivers with the following settings. page, select Start. The printer will begin installing.
Once the Installation is complete page appears, select Exit
The printer install should now have been completed. Print a page of something in black & white to confirm that the install was successful.

Phone the following support line if the above instructions do not work: Canon Support Line 08002canon (0800 222 666), option 1, option 3

Printer Serial Number: QZL51577

How to link a Mac to the printer

Firstly, find and install the PS Printer Driver & Utilities for Macintosh with your Mac version from this list
Go through the process of installing the driver and move driver to bin when installed as prompted
Next, go to System Preferences and go to Printers & Scanners
Click the "+" button
Go to the IP tab at the top, enter the Address: 192.168.20.95
Change Protocol to Line Printer Daemon - LPD
Change Name to Savvy Printer or your preferred name
Hit Add