HOW TO OVER-RIDE TO ROOM
Load following shared parameters into Project Parameters:
Room Name faked.DO
Room Name faked_Use.DO
While doing it make sure you:
Assign to Doors (and Windows if you want).
Set both to Instance.
Set Room Name faked.DO to Values can vary by group instance.
Go to a 3D view of the whole building.
Turn off every thing but Doors (and Windows if you are doing it for windows)
Select everything.
Make sure Room Name faked_Use.DO is unticked.
if Room Name faked_Use.DO is not in the Properties window use filter to deselection non-doors (and windows)
if some doors are in groups you need to deselection Groups in the filter, then edit each group (edit group; select all doors; change the parameter; close group).
Open or create your door schedule.
Add fields Room: To Room, Room Name faked.DO and Room Name faked_Use.DO.
Create a Calculated parameter - call it Room.
Make it Text.
Put in formula:
if(Room Name faked_Use.DO, Room Name faked.DO, Room: To Room).
Go through the schedule, tick Room Name faked_Use.DO and fill in Room Name faked.DO where you want to to fake the room name.
(if some doors are in Groups you will have to edit the groups to change the parameters)
When finished Hide fields Room: To Room, Room Name faked.DO and Room Name faked_Use.DO.
Done.
HINT:
Create a working Door Schedule by duplicating the original schedule. Unhide all columns in this schedule and use it to edit the schedule.
HOW TO ADD A DOOR TO JOINERY
Nest a door swing family into your casework family. (e.g. DO_Door-Hinge.2D.ANT.rfa).
Open the nested family and make sure it is Shared.
If you want multiple doors that schedule as a single door create a new family from an existing one (e.g. DO_Door-Hinge.2D.ANT.rfa) containing multiple nested door swings
(e.g. multiple instances of +DO_Door Plan-Hinge.2D.ANT.rfa). Note these nested families are NOT shared.
Make sure to associate parameters between the nested families and family itself.
Once your casework family is in the main project use Tab key to select the door swings, then you can change parameters.