ISSUING DRAWINGS - NEWFORMA

IF YOU JUST WANT TO DO A PRINT SET DO NOT USE THESE INSTRUCTIONS.

They are for printing and putting drawings into Newforma. Once in Newforma transmittals can be created and drawings issued via the internet gateway.

To just print PDFs either use standard Revit printing, or GUIDELINES > PRINTING > PRINT USING NEWFORMA

These instructions assume the project you want to issue drawings from has been setup in Newforma.

For instructions on how to connect Revit to a project refer to GUIDELINES > PRINTING > SET UP NEWFORMA REVIT ADD-IN

REGISTER MODEL

If some of the icons are grayed out you will have to connect the model file to Newforma.

From Newforma tab, select Connect Model.

If necessary Register the Revit Building Model with Newforma by selecting the project and hitting OK.

PUT PDFs IN NEWFORMA

Next hit the Document Control icon and select Synchronize and Add Revisions:

(if it is grayed out you are not connected to a project - see above)

A large dialog box appears.

Do not change any of the properties to Synchronize, they should already be set up. If not refer to GUIDELINES > PRINTING > SET UP NEWFORMA REVIT ADD-IN

1. Click on the filter symbol under the Sheet Sets column.

2. Select the Sheet Set(s) you want to issue.

3. Tick the drawings you want to issue.

4. Select the appropriate Setup Name.

When done hit the Synchronize and Add Revision button (it will be grayed out until you select sheets to issue).

Resultant PDFs will be saved to the folder listed after Store PDFs in: (should be 00 NEWFORMA /00 Drawings, or could be 07 DOCUMENT CONTROL folder of your project).

And Newforma will be updated to included these drawings.