Download TB192 30C/55C Sideshifter Cylinder Service Kit 559972 & 559974 .PDF
561436 Downloads
8.31 MB .pdf
Turn the truck off, then open the truck auxiliary control valve(s) several times in both directions. Portland,OR 97226 May 1989 0 Remove the nut fastening the piston to the rod. @ For reassembly, reverse the above procedures except as follows: l l Tighten the piston nut to a torque of 40-45 ft. Place a screwdriver on one side of the ring and tap the screwdriver with a hammer. TB 192 * m em4 Technical Bulletin 30C/55C Sideshifter Cylinder Service Kit 559972 and 559974 This sheet provides instructions for 30C/55C Sideshifter Cylinder Service Kit 559972 (includes seals, new retainer and snap ring). @ Remove the retaining ring by first tapping the retainer into the shell. @ Remove the cotter pins from the anchor pins retaining the cylinder to the anchors. The retainer ring will compress at the split and turn sideways as shown at right. Cylinder Removal A Before removing any hoses, relieve pressure in the hydraulic system. Retaining Ring NOTE: Once a new retainer has been installed, the cylinder can be serviced with Seals Service Kit 559974. Take care not to gouge the shell bore with the screwdriver. @ Remove and replace the piston seals using a blunt screwdriver. Cylinder Service 0 Remove the capscrews fastening the washer to the retainer. Call: l-860CASCADE (227-2288)or 668-669-6366 FAX: 603-669-6367 Write:Cascade Corporation,PO Box 26187. 559973 NOTE: cascade” For Technicel Aeeistence and to Order Parts . WARNING: 0 Remove, tag and plug the hoses to the cylinder