Download ET42202M-S-PD L2+ Managed 20-port 100Base-FX/1000Base .PDF
9617893 Downloads
2.12 MB .pdf
4 Users The function is used to configure SNMPv3 user. 0 ET42202M-S-PD L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or 100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs 3-5. Click “Refresh“ to refresh the port detailed statistics. VLAN Range : Indicate the VLAN range in which DHCP server is enabled or disabled. Secure : Only static MAC entries are learned, all other frames are dropped. Buffering traffic will give some latency in the traffic. Click “<< or >> “ to move to previous or next entry. V2 Reports Received : The number of Received V2 Reports. 0 ET42202M-S-PD L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or 100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs 2-5. If the maximum datagram size does not take into account the maximum header size, samples may be dropped. This is also a link to the STP Detailed Bridge Status. com The RADIUS Authentication Statistics Server 247 Ver. 1AB and MED extensions defined by TIA-1057 and can relay IEEE 802 frames via any method. Reset- Click to undo any changes made locally and revert to previously saved values. 0 ET42202M-S-PD L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or 100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs Not Ready: The server is enabled, but IP communication is not yet up and running. Write Community Indicates the community write access string to permit access to SNMP agent. 0 ET42202M-S-PD L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or 100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs 5-4. It will revert to previously saved values Figure 2-11. Click the save to save the setting If you want to cancel the setting then you need to click the Reset button. Click Configuration, Port, then Port Description 2