Electrolux EU1321T User Manual

Download Electrolux EU1321T User Manual .PDF

7237266 Downloads

2.60 MB .pdf

This will prevent it from becoming a death-trap for a child. Make sure that there is nothing at the back, at the top and at the bottom of the appliance to obstruct air circulation. The inner lining of the appliance consists of chan- nels through which the refrigerant passes. Furthermore: if the appliance seems too noisy check that the sides are not touching furniture that can transmit or amplify a noise or a vibration. Do not use metal tools to remove frost so as to avoid seriously damaging the appliance. 1a), remove handle (3) and refit it on the opposite side. Food to be frozen has to be placed in the top compartment. On the inner freezer door you will find schematic drawings of foods and animals indicating maximum storage time (in months) possible from the time of freezing. It is in fact important to remember that once the foods have thawed out, they deteriorate fast. Solid ice should be allowed to thaw when defrosting the appliance. Another point to remember is that lean foods keep better and longer than fatty foods. The supply-lead plug in fact incorporates a special earth or ground contact for this purpose. This latter opera- tion will maintain the appliance's excellent standards of performance and save energy. 3, place underneath a basin to collect the defrost water. Refer to your local Service Centre, and always insist on genuine spare parts. After this, reset the freezer for normal storage use. INSTALLATION If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock on the door or lid, be sure to make that spring lock unusable before you discard the old appliance. SOMETHING NOT WORKING If the appliance is not functioning properly check that: the plug is firmly in the wall socket and the mains power switch is on; there is no power failure; the control knob is in the right position. 2) towards the left to position «S» («SUPER») The pilot lamp «B» will then light up. 1) Before carrying out the operations described below, pull out the mains plug from the wall socket