“DETA-Professional”

Download “DETA-Professional” .PDF

6535929 Downloads

2.80 MB .pdf

To write to this address, it is necessary to press the “WR” key. With temperature increasing to normal levels, condensation may form inside and damage electronic circuit boards. ) on various carriers (water, alcohol, homeopathic grain, etc. The red LED will flash at the rate of pulse repetition. Turn on the HF filter by pressing the “HIGH” button of the “FILTERS” block. Do not use or store the device in dusty or dirty areas. Sale shop Shop seal (signature) Owner’s name and address Signature Works carried out to eliminate the fault: Repairs carried out by (date) (signature) Owner (signature) Repair company Company seal cut line COUNTERFOIL No. Set the “INTERRUPT”, “FILTERS” and “CONTROL” switches to the “off ” position. Drugs can be disconnected by pressing “OUT” again. The device permits diagnostics and therapy on both corporal acupuncture points as well as auricular acupuncture points. “AUTO” mode With the “SPEED” knob of “CHANGE” unit set the required frequency tuning time on the range in “wave swings” mode. Floor coverings in the workplace should not accumulate static charge. To enter a new drug instead of an old one, it is necessary to enter the number of the drug again. Control with the pharmacological electronic selector is described in the chapter “Electronic medical selector”. To switch on the vegetative resonance “VRT” test mode, it is necessary to place the probe on the point to be measured, and then press and hold button “2” on the universal probe (see fig. To continue, it is necessary to enter the write address and press the “*” key. To erase information from media, it is necessary to connect the cup with the material for recording to the “INPUT BRT” and “OUTPUT BRT”, and turn on “INVERSION”. Switch on BRT mode with the “POWER” button on the “BRT” panel (see fig. 2 for warranty repairs to device “DETA-Professional” device Serial No. Other antennas may result in damage to the device