Download Sherwood RD-6513 Stereo System User Manual .PDF
1124181 Downloads
8.95 MB .pdf
• You can set the distance within the range of 1 ~ 30 feet in 1 feet intervals. (For details, see the operator's manual of the component to be connected. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. S(Small) : Select this when connecting speakers that can not fully reproduce sounds below crossover frequency. Only use attachments accessories specified by the manufacturer. 21 12:20 PM 페이지 38 When selecting the CROSSOVER ENGLISH • When speakers are set to "S (Small)", be sure to set their crossover frequency correctly according to their frequency characteristics. Select the desired preset number (1~30) and press the (MEMORY/)ENTER button. • Each time these buttons are pressed, the tone is selected as follows : → BASS ↔ TRBL (treble) ↔ TONE : ON ← • The tone mode is displayed for several seconds. Note : When the SPEAKER button is set to off, the test tone function does not work. Continuous or intermittent hissing noise during AM reception, especially at night. • Then "DRC : ~ " (or "PANO : ~ ") is displayed for several seconds. This makes it easy to hear all of the sound track when watching movies at night at low levels. 21 12:20 PM 페이지 37 When selecting the DISTANCE button. • Loud test tones are output from each speaker and then if the auto speaker setup procedure has been completed and the results are memorized, the "AUTO SET" will be displayed. • Auto presetting function automatically searches for FM stations only and store them in the memory. Note : • Be sure to make either a OPTICAL or a COAXIAL DIGITAL connection on each component. 21 12:19 PM 페이지 6 System Connections ENGLISH • Do not plug the AC input cord into the wall AC outlet until all connections are completed. • To obtain the best surround effects, the speakers except the subwoofer should be full range speakers. These limits are designed to provide reasonable protection against harmful interference in a residential installation. (For details, see th operator's manual of the component to be connected