programming infinity systems without multi-link firmware

Download programming infinity systems without multi-link firmware .PDF

1058693 Downloads

1.97 MB .pdf

If the forced call is not answered, a second call will be placed one minute later. The system will then ask you which option number you want. Changing the clock will be recorded as an on-line change. If your system is not equipped with this function, you will not be able to enter this programming area. The system will then display a "PLEASE WAIT" message. 1 + ENTER YOU MUST CONFIRM THAT YOU WISH TO ERASE THIS CARD. If you have escaped to the menu prompt level, the system will say "READY MENU". To re-enter the programming mode, follow the procedures described in the second point on the previous page. The number of cards that your system will hold can be checked using area 22, selection 8 (see page 26). Thus, January 7,1988 would be entered as 01071988, but will be displayed as 01/07/1988. E) a "✱ “ will hang-up the Infinity system without allowing entry. THE SYSTEM WILL ASK YOU TO CONFIRM YOUR DECISION TO ERASE AN ENTIRE AREA. These prompts will not appear if your system is not equipped with the option that allows names to be associated with cards and/or codes. SYSTEM PROMPT ENTER ENTRY CODE TO ERASE EXAMPLE OF TYPICAL ENTRY IMPORTANT NOTES 12345 + ENTER THE NUMBER OF DIGITS IN THE ENTRY CODE IS SET IN AREA 08. Page 16 of 31 Doc 6001021 Rev C INFINITY "L" EXAMPLE` EXAMPLE OF TYPICAL ENTRY SYSTEM PROMPT THESE ARE ALL THE OTHER MESSAGES: LINE 01: ACCESS GRANTED LINE 02: SYSTEM IS DIALING LINE 03: LINE IS AVAILABLE LINE 04: LINE IS IN USE LINE 05: LINE IS BUSY LINE 06: PLEASE ENTER NOW LINE 07: PLEASE TRY AGAIN LATER LINE 08: PRESS # TO TRY AGAIN LINE 10: SYSTEM IN USE LINE 11: INVALID CODE LINE 12: PLEASE WAIT 1 + ENTER IMPORTANT NOTES ENABLES YOU TO EDIT LINE 1. If you decide to change the instructions and then later decide to change them back to the factory settings, simply enter a "0". IF THE TELEPHONE NUMBER YOU ENTER IS 10 DIGITS IN LENGTH, THE INFINITY WILL AUTOMATICALLY DIAL A “1” BEFORE THE TELEPHONE NUMBER. Please refer to page 28 to see if any of the special features apply to your application. If the occupant answers the call, they can take one of five actions by dialing a number on their telephone (the system recognizes signals from telephones using tone dialing only, except for the first action, which can be initiated by a rotary/pulse dial telephone): A) a "9" will activate relay 1 to open a door or gate. AREA 11 - SETTING HOLIDAY SCHEDULES PURPOSE: Establishes the dates that the unit will treat as holidays in assessing time zones and automatic lock/unlock schedules