Stovax View 7HBi Boiler Inset Stove Instructions

Download Stovax View 7HBi Boiler Inset Stove Instructions .PDF

789959 Downloads

7.12 MB .pdf

Burning Solid Mineral fuels Fuel is burning too slowly All Fuels Appliance is not producing much heat. 4 Suitable access must be provided to enable the collection and removal of debris. Persistent fume emission is potentially dangerous and must not be tolerated. 1 Whether using wood or solid fuel the process for lighting the appliance is the same. Apply the cleaning fluid to a cloth before rubbing onto the glass. 1 It is very important to determine the correct size of appliance for the house: A heat leak radiator must be fitted in the gravity circuit to dissipate any excess heat produced from the boiler when connected demand is low. 6 Clean matt black appliances using Stovax Colloidal black or Stovax Grate Polish. 4 Place tray flat on the fixings on the firebed, see Diagram 15. 3 On appliances with printed glass do not use cleaning agents that have a high alkaline or acidic content, for example Stovax Gel Cleaner, these are aggressive cleaning agents designed to be used with heavily stained clear glass. Please note that all warranties are effective from the date of purchase. Adequate facilities must be available for loading, unloading and on site handling. If the appliance is used continuously throughout the year, or it is used to burn wood, more frequent sweeping is recommended. 2 Use a 13mm A/F spanner to loosen the half lock nuts either side of the appliance body. — Do not connect or share the flue or chimney system with another heating appliance. 4 Please be aware that, during use, rope seals may discolour. 8 Press the new Stovax rope into the locating groove, placing the joint in the middle of the lower edge of the door. This causes tars and creosotes to build-up in the appliance and flue system. 14 This section applies to burning wood on a Multi-fuel grate or when a Woodburning tray is fitted. 17 Fill the void at the back of the box with 6:1 vermiculite/cement mix or any other good non-combustible insulation material. Balanced means each radiator having a 10˚C difference in temperature between the flow and the return, ideally 80˚C flow and 70˚C return