BOBCAT Hardware User's Manual

Download BOBCAT Hardware User's Manual .PDF

6352068 Downloads

6.10 MB .pdf

Have the PC and camera on a working/charged UPS system. Hot Pixels – pixels that during normal camera operation are normal, but in long integration modes (programmable frame time) behave as high-intensity bright pixels. 9 Analog Offset – Channel 3 This register sets the analog offset for channel 1. 1 OVERVIEW The Lookup Table file can be created using any standard ASCII text editor or by using Microsoft Excel. The photons falling on the CCD surface create photoelectrons within the pixels, where the number of photoelectrons is linearly proportional to the light level. The following test images are available: - Black – displays black image (value x0000) - Gray – displays an uniform dark gray image (value x2000) - White – displays an uniform white image (value 3FFF) - H Ramp Still – displays a stationary horizontal ramp image - V Ramp Still – displays a stationary vertical ramp image - H Ramp Move – displays a moving horizontal ramp image - V Ramp Move – displays a moving vertical ramp image - Vertical Bars – displays a set of 8 vertical gray bars with different gray levels. The KODAK TRUESENSE Color Filter pattern uses a technology which provides a 2x improvement in light sensitivity as compared to a standard color Bayer pattern. 2 11/20/2012 250 of 265 BOBCAT Hardware User’s Manual E. This artifact is called „Shading‟ and in normal camera operation should be removed. During DPC, HPC, FFC or LUT upgrade the camera power must be on all the time, and the process must not be interrupted. This mode provides the ability to trigger the camera with its original (free-running) frame rate. Address Data : : 0x7004, 0x7008, 0x700C, 0x7010 <Assembly Part Number> 4. The user can change “Area”, “Exposure” and “Luminance”. Address Data (2:0) : : Data (31:3) : 0x0510 000 – no de-bounce 100 – 10 s de-bounce time 101 – 50 s de-bounce time 001 – 100 s de-bounce time 110 – 500 s de-bounce time 010 – 1. - dual output f ast clock - - - single output f ast clock 140 120 Frame Rate 100 80 60 40 20 0 200 400 600 800 1000 1200 Active Lines 1400 1600 1800 2000 Figure 2. In terms of the serial protocol, all registers are defined as 16-bit address (hex format), and 32-bit data (hex format). 3 H1 Superimposed Line Position This register set the position of the horizontal line H1 (top) position. Progress Bar – displays the progress status of the up-load process. The example shown is to upgrade the camera firmware as this is more complicated, than the loading of the custom DPM, HPM, FFC and LUT files. 40 μm Digital, 8/10/12/14 bit Digital, 8/10/12/(14 sing