Download DXS-62A PRODUCT DESCRIPTION FEATURES .PDF
1737640 Downloads
2.93 MB .pdf
All products returned for warranty service require a Return Product Authorization Number (RPA#). Linear does not warrant this product to consumers. WHEN THE DXS-62A IS IN THE SUPERVISED MODE, THE LED SIGNAL INDICATOR WILL BLINK RAPIDLY DURING ACTIVATION PROGRAM THE TRANSMITTER INTO THE RECEIVER BY PLACING THE RECEIVER INTO PROGRAM MODE. Refer to the receiver’s instructions for details on operation and programming. Infrequently used radio links should be tested regularly to protect against undetected interference or fault. This Linear LLC Warranty is in lieu of all other warranties express or implied. REFER TO THE RECEIVER'S PROGRAMMING INSTRUCTIONS FOR DETAILS. Each DXS transmitter is factory set to a unique code, so no field coding is required. If the battery tests low, a low battery signal will be sent. Consumers should inquire from their selling dealer as to the nature of the dealer’s warranty, if any. Every two hours the transmitter tests for a low battery. Pressing the button on the transmitter sends a digital coded wireless signal to its companion receiver. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. All implied warranties, including implied warranties for merchantability and implied warranties for fitness, are valid only until the warranty expires. This warranty extends only to wholesale customers who buy direct from Linear or through Linear’s normal distribution channels. The DXS-62A can send a signal for up to 30 seconds per activation. This test takes place even if status transmissions have not been enabled. com WRISTBAND INSTALLATION POCKET CLIP PENDANT HOLDER PENDANT HOLDER INSTALLATION POCKET CLIP INSTALLATION INSTALL THE PENDANT HOLDER THEN CUT AND REMOVE THE LANYARD NOTE: LANYARD SIDE OF PENDANT HOLDER FITS CLOSEST TO THE SIGNAL INDICATOR STATUS OPTION & PROGRAMMING IF THE TWO HOUR STATUS TIMER IS REQUIRED FOR SUPERVISION, PERMANENTLY ENABLE THE TIMER BY PRESSING THE TRANSMITTER BUTTON FIVE TIMES IN SUCCESSION WITHIN FOUR SECONDS. Receivers must be programmed to the transmitter’s code before system testing and operation. 000” - SCALE: 1-1 DXS-62A PRODUCT DESCRIPTION BY SUPERVISED EMERGENCY TRANSMITTER Operation Instructions FEATURES The Model DXS-62A is a battery powered, miniature, water-resistant*, supervised transmitter designed for use in emergency applications with Linear’s DX and DXS Format receivers