Download A9-430-0001 Rev 1.0 RTX430-3QR User Manual .PDF
1755403 Downloads
2.93 MB .pdf
Please contact CRU-DataPort if any items are missing or damaged: Accessories Quantity RTX430-3QR Enclosure 1 Power cord 1 USB3 Cable 1 3. A screen should appear that allows you to select the volume you wish to use. 1 Formatting a Drive To format, use Disk Utility (pictured above, right), which can be found in the Applications folder. After the unit has initialized, the LCD will display the drives’ mode and status. After that a new drive will need to be inserted in place of the failed one. You can toggle to the approximate time remaining by pressing enter on the front panel. RAID • Glows green when system is performing as expected. Drive Activity Glows amber* when the drive is being accessed, either reading or writing from the drive. See Section 6 for instructions on how to configure a RAID, and Section 8 for instructions on how to format the RAID in Windows or Mac operating systems. Contacting Technical Support Still need help? Please contact our Technical Support team through CRU-DataPort. To format the volume, right-click the Drive Properties Box (labeled ‘D’ in the picture below) and select New Partition… (Windows XP) or New Simple Volume. In order for Configurator to access the RTX enclosure, change the configuration switch on the back panel to USB 2. Technical Specifications 9 Navigation Buttons Power LED RAID Status LED System Status LED Drive Power and Activity LEDs TrayFree Drive Bay Ejection Handles Back of the RTX 430-3QR Cooling Fans Power Socket USB Mode Switch Power Switch FireWire 800 Ports USB 3. • Before starting any type of hardware installation, please ensure that all power switches have been turned off and all power cords have been disconnected to prevent personal injury and damage to the hardware. **If both drives in either the RAID 0 or RAID 1 set fail, then the entire RAID will fail. The RTX430-3QR offers four options for RAID configuration. 4 1 drive** * The RAID level becomes available as a menu option when exactly these numbers of hard drives are installed inside of the RTX enclosure. Avoid all dramatic movement, tapping on the unit, and vibration. 2 Hot Spares (Host Standby) Hot spares are connected as part of your RAID and are switched into operation when a drive fails. Limitation of Liability The warranties set forth in this agreement replace all other warranties