OPERATING MANUAL R410A

Download OPERATING MANUAL R410A .PDF

3826221 Downloads

6.48 MB .pdf

Please refer to [Set the day of the week and current time] (page 5). If frost forms, the air conditioner will temporarily stop, and the defrosting circuit will operate briefly (Max. However, it does not turn off automatically within a certain time of setting the POWERFUL Operation mode. To use the SLEEP timer 1 Press the TIMER SETTING button ” will be firstly displayed flashing. SLEEP timer setting Set temp 1 °C 2 °C Set time 3 °C 4 °C 1 hour 30 minutes Set temp 1 hour 1 °C 2 °C 1 hour 30 minutes Set time 14 9319356020_OM_EN. Press the SELECT button to set the desired OFF time. If you feel that insufficient heating performance is being produced, we recommend you use this air conditioner in conjunction with another kind of heating appliance. To stop 10 °C HEAT Operation Press the START/STOP button . Also, the fan may operate at very low speed when adjusting room humidity. Example of how to set the timer 1 Monday to Friday Program Set the ON Timer with a temperature of 24°C for 7 am. Press the SELECT button to set the desired ON time. 22 ● During Dry mode, the indoor unit will operate at low speed; in order to adjust room humidity, the indoor unit’s fan may stop from time to time. Microcomputer-controlled Automatic Defrosting ● When using the Heating mode under conditions of low outdoor temperature and high humidity, frost may form on the outdoor unit, resulting in reduced operating performance. The air conditioner will then restart automatically in its previous mode when the power is restored. indd 19 7/18/2011 1:39:23 PM CLEANING AND CARE Install or Replace the Air Cleaning Filter 1. 7 ● During Heating operation, water may be produced from the outdoor unit due to Automatic Defrosting operation. About the POWERFUL Operation Cooling/Dry ● Powerful Operation mode is automatically turned off when the room temperature has fallen to the set temperature or when 20 minutes have passed after setting the POWERFUL Operation mode. to select the day of RESET SU Press the NEXT button 3 Never mix new and used batteries, or batteries of different types. ● Please do not touch by hand or put your finger into it during the open panel opening/shutting operation. • When compressor rotational speed and fan speed are low enough, it may not be operated even if it has been set