Download Form No - DAE e .PDF
7510838 Downloads
7.35 MB .pdf
(Maximum Four weeks will be allowed for attending and rectification of faults during the warranty period. 2 GHz < -90 dBm With these exceptions for LO related spurs < -80 dBm: 2080-2120 MHz < -80 dBm: 3895-3945 MHz < -85 dBm: 4780-4810 MHz g) Residual FM < 10 Hz P-P (95% confidence) 5. 3) Scope of supply and deliverables: The successful bidder shall deliver following items and shall quote for the full quantity as mentioned in the table given below: S. 0) Technical requirements for spectrum analyzer: 4. Options for mapping, modulation analysis, pulse measurements, playback of recorded files, signal survey, and frequency/phase settling Real time Spectrum/Spectrogram shall be available. SignalVu-PC Spectrum measurements with Span > 40 MHz may use LF or RF path in the first segment of the spectrum sweep. d) Test Certificates and calibration certificates: Calibration certificate shall be provided along with instruments. Compliance certificates a) EMC emissions EN61000-3-2, EN61000-3-3, EN61326-2-1 b) EMC immunity EN61326–1/2, IEC61000-4-2/3/4/5/6/8/11 7. Para 4 gives technical requirements of the product. 9 ns (acquisition BW = 40 MHz) Signal strength indicator Measurement bandwidth Up to 40 MHz, dependent on span and RBW setting Tone type Variable frequency based on received signal strength Traces Three traces + 1 math trace + 1 trace from spectrogram for spectrum display Trace functions Normal, Average (VRMS), Max Hold, Min Hold, Average of Logs Detector Average (VRMS), Average, CISPR peak, +Peak, -Peak, Sample Spectrum trace length 801, 2401, 4001, 8001,10401, 16001, 32001, and 64001 points RBW range 10 Hz to 8 MHz 1 MHz 100 kHz 10 kHz 1 kHz 1300 MHz/sec 1230 MHz/sec 1090 MHz/sec 360 MHz/sec Operating b) Humidity (operating) c) Dynamics -10 °C to +55 °C (+14 °F to +131 °F) Non-operating -51 °C to +71 °C (-60 °F to +160 °F) 5% to 75% ±5% relative humidity (RH) from +30 °C to +40 °C (+86 °F to 104 °F) 5% to 45% RH above +40 °C to +55 °C (+86 °F to +131 °F) Mechanical shock, operating Half-sine mechanical shocks, 30 g peak amplitude, 11 μs duration, three drops in each direction of each axis (18 total) Random vibration, nonoperating 0. range DANL (dBm/Hz) DANL (dBm/Hz) typical < 22 MHz (LF path) 100 kHz - 42 MHz -130 -133 ≥ 22 MHz (RF path) 2 MHz - 5 MHz -145 -148 > 5 MHz - 1. Full-featured spectrum analysis capability shall be included with interface software for spectrum and signal analysis. a) Triggers Trigger/sync input b) c) d) 112 Ms/s, 16-bit integer real samples 40 MHz BW, 28 ±0. 0 V Trigger level, positive-going threshold voltage 1. The maximum level at the RF input for which the instrument will meet its measurement specifications. Quotations submitted with incomplete details are viable for rejection. c) Mandatory information: Suppliers shall give complete details of their product, country of origin and compliance certificates from users for technical evaluation (Purchase order reference shall be attached if same equipment or equivalent has been supplied to any Government or defence Laboratory). 5 (Reference level ≤ -50 dBm, RF input terminated with 50 Ω load) CF range 9 kHz - < 1 GHz < -100 dBm CF range 1 GHz - < 3 GHz < -95 dBm CF range 3 GHz - 6. Center frequency < 22 MHz (low-frequency path) +15 dBm Center frequency ≥22 MHz (RF path) +20 dBm Amplitude accuracy at all Center frequency center frequencies Warranted Typical Typical (18 °C to 28 °C) (95% confidence) (-10 °C to 55 °C) 9 kHz - < 3 GHz ±1. Applies to corrected IQ data, with signal to noise ratios >40 dB