Download 20014905E MXS 10, Manual EU, Print file 004.indd .PDF
3032196 Downloads
5.44 MB .pdf
Removing or damaging the seal will void the warranty. indd 6 2011-10-11 08:50:52 • The charger is designed for charging 12V lead-acid batteries. Is the charger connected to a 12V battery? 20–300Ah 20–300Ah ERROR LAMP 3. STEP 2 SOFT START Tests if the battery can accept charge. Disconnect the charger from the wall socket before disconnecting the battery. • Ensure that the cabling does not jam or comes into contact with hot surfaces or sharp edges. The Recond program adds STEP 6 to the normal battery program. The charger monitors the battery voltage and gives a pulse when necessary to keep the battery fully charged. CTEK battery chargers produce very clean voltage and current with low ripple. Follow the 8-step display through the charging process. During the Recond step voltage increases to create controlled gasing in the battery. MANUAL to the purchase of your new professional switch mode battery charger. 7V @ 25°C Declining current Checks if voltage drops to 12V 13. STEP 7 FLOAT Maintaining the battery voltage at maximum level by providing a constant voltage charge. 5A Use to return energy to the empty WET and Ca/Ca batteries. This step prevents that charging proceeds with a defect battery. 4V @ 25°C Declining current Checks if voltage drops to 12V 13. indd 3 2011-10-11 08:50:46 CHARGING PROGRAMS Settings are made by pressing the MODE-button. This charger is included in a series of professional chargers from CTEK SWEDEN AB and represents the latest technology in battery charging. The power lamp will indicate that the mains cable is connected to the wall socket