EagleTac MX25L4C 4xCREE XM-L2 XM-L2多灯ライト遂に登場
投稿日: Nov 30, 2014 2:26:59 PM
EagleTacからXM-L2多灯ライトがついに登場しました。
18650Li-ion充電池を4本使うコンパクトなゔボディにヘッドサイズもコンパクトなまま効率の良いリフサイズにするとXM-L2が4灯がベストのようです。
ボタンの脇に見えるのはインジケーターランプかな?
バッテリーがホルダーレスで直入れ出来るのはかなり便利、
以下、メーカーサイトより抜粋
Dimensions
Head Dia.
2.5 inches (62 mm)
Body Dia.
2 inches (52 mm)
Length:
5.6 inches (143 mm)
Weight
14.3 ounces (408 grams)1
Battery Type
4x18650 or 8xCR123A2
Compatible battery (diameter/length)
123A: (16-16.8mm/34-34.5mm)
18650: (18-18.8mm/67-68.5mm)
Operating voltage
10V - 24V
Do not exceed 24V. Do not use rechargeable 3.0v/3.7V CR123A.
What's included
MX25L4C flashlight
Spare o-rings
User Manual
Mil-Spec Para-cord Lanyard w/ quick attachment clip
4xCR123A Battery Magazines
All models
Base model
Includes everything listed in "what's included" section above.
Comes with smooth aluminum bezel.
Flat tail-cap (tail-stand)
YRGB Kit
Includes everything listed in "what's included" section above, plus:
(Extra) signal connection through the body tube for rear accessories add-on
Tailcap w/ switch and tail-standing ability
Flashlight head come with front-mount thread for bezel and filter attachment
Stainless steel bezel
Heavy Duty Nylon Holster w/ self-retention device and open-top design
Carrying method
Para-cord lanyard with quick attachment clip
Waterproof
IPX-8 standard
Replaceable items
Lens
LED
4 * CREE XM-L2 Cool White U2 LED
4 * CREE XM-L2 Neutral White T6 LED
Max output
CREE XM-L2 U2 LED
LED lumen: 4800
ANSI FL-14 lumen: 4020
CREE XM-L2 T6 LED
LED lumen: 4465
ANSI FL-14 lumen: 3740
Beam Profile
CREE XM-L2 U2 LED
Center lux: 60,100 lux
Center spot angle: 4°
Spill light angle: 51°
Beam distance: 536 yards / 490 meters
Lens
Waterwhite glass lens w/ harden treatment
Anti-reflective (AR) coating on both side (96% transparency)
LED circuit
C7000 HV
Wide voltage input range
48-Watt output
Low internal resistance design offers up to 93% efficiency7
Non-dimming constant current regulation for all output levels
Negligible uA standby current
Energy saving feature5
High voltage mode to reduce output above 18V input
Dual color LED voltage report system
Reflector
Smooth aluminum reflector
Material
HAIII hard anodization aerospace aluminum
Controls
Output and Runtime
Four brightness levels (Regular mode)
Led lumen: 48005/2180/410/18
ANSI FL-1 lumen: 40205/1830/345/15
Runtime:
1.5/2.5/20/300+ hours (4x18650)
0.9/1.7/11/150+ hours (8xCR123A)
Seven o brightness levels + Strobe (Tactical mode)
Led lumen: 48005/1000/Strobe I/II
ANSI FL-1 lumen:
40205/835/Strobe I/II
Runtime:
1.5/7 hours (4x18650)
0.9/4.8 hours (8xCR123A)
Neutral white T6 LED offers about 7% less lumen output than the U2 LED.
Seven hidden auxiliary outputs
Strobe/Strobe(Var)/Flash(Hi)/S.O.S.(Fast)/S.O.S./Beacon/Flash(Lo)
Operations
Turn on the light by press and release the on/off button switch (<0.4s). To turn off the light, press and release the switch again.
For momentary on, press and hold the button switch for immediate output.
Twist the head to select between four output levels. You can pre-select the desired output level before turning on the flashlight.
Instant Turbo output - at any output level, press and hold the flashlight for 100% output. Release the button to return to previous level.
Instant Strobe output - at any output level (or off), double press and hold the on/off button switch for strobe output. Release the button to return to previous level (or off).
To access auxiliary levels, starting at head tight position (1st level), loosen to 3rd (or 4th level) and tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
Advance (Programmable Features) To switch between tactical and regular mode, turn on the flashlight at 1st level, dial to 2nd level and then back to 1st level for five times within five seconds.
High voltage mode - For optimal circuitry temperature operating at higher voltage, when initial startup voltage exceeds 18V, the maximum output will be reduced by 15%.
LED voltage indicator
4 x 18650 mode
(Red flashing) Low than 12.4V
(Red) Between 12.4 and 14V
(Blue) Higher than 14V
8 x CR123A mode
(Red flashing) Low than 13.5V
(Red) Between 13.5 and 16.5V
(Blue) Higher than 16.5V
Other features
LED direct soldering on copper for maximum heatsink ability
User replaceable glass lens
Battery reverse polarity protection
Tail stand
Battery reverse polarity protection
Ultra low internal resistance phosphor bronze springs (silver coated)
Tail-cap w/ switch (Kit)
Warranty
Ten years performance guaranteed warranty