CREE MT-G2搭載のEagleTac SX25L3間もなく発売！

投稿日: Jun 15, 2013 3:40:8 AM

CREE MT-G2搭載のEagleTac SX25L3間もなく発売！

Dimensions

Head Dia.

1.85 inches (47 mm)

Body Dia.

1.8 inches (45.5 mm)

Length:

5.7 inches (144 mm)

Weight

10.9 ounces (309 grams)1

Battery Type

Operating voltage

    • 5.4V - 19V

  • All batteries are connected in series. Do not exceed 19V. Do not use six 3.7V RCR123A.

What's included

    • SX25L3 flashlight

    • Spare o-rings

    • User Manual

    • Mil-Spec Para-cord Lanyard w/ quick attachment clip

    • Flat tail-cap (tail-stand)

All models

    • Base model

      • Includes everything listed in "what's included" section above.

      • Comes with smooth aluminum bezel.

    • YRGB Kit

      • Includes everything in base mode, plus:

      • (Extra) signal connection through the body tube for rear accessories add-on

      • (Extra) tailcap w/ switch and tail-standing ability

      • Flashlight head come with front-mount thread for bezel and filter attachment

      • Stainless steel bezel

      • Heavy Duty Nylon Holster w/ self-retention device and open-top design

      • ET47 diffuser filter, ET47 yellow filter, ET47 red filter, ET47 green filter, ET47 blue filter.

replaceable items

    • Lens

LED

    • Cool White

      • CREE MT-G2 P0 LED (5000K, 2Step)

      • CREE XM-L2 U2 LED (6500K)

    • Neutral White

      • CREE XM-L2 T6 LED (4300K)

    • Max output

      • MT-G2 P0 LED

        • LED lumen: 2750

        • ANSI FL-14 lumen: 2375

      • XM-L2 U2 LED

        • LED lumen: 1505

        • ANSI FL-14 lumen: 1245

      • Beam Profile

      • MT-G2 P0

        • Center lux: 25,100 lux

        • Center spot angle: 10.3°

        • Spill light angle: 57.6°

        • Beam distance: 347 yards / 317 meters

      • XM-L2 U2

        • Center lux: 53,900 lux

        • Center spot angle: 6°

        • Spill light angle: 57.2°

        • Beam distance: 507 yards / 464 meters

    • Lens

      • Waterwhite glass lens w/ harden treatment

      • Anti-reflective (AR) coating on both side (96% transparency)

    • LED circuit

      • C5000 ST

        • Current regulated buck driver w/ efficiency of up to 93%

        • Wide voltage input range

        • Non-dimming constant current regulation for all output levels without flicking

        • Low battery voltage warning7

        • Energy saving feature5

        • (user adjustable to prolong runtime)

        • Very low standby current (uA)

    • Reflector

      • Smooth aluminum reflector (XM-L2)

      • Light orange peel aluminum reflector (MT-G2)

    • Material

      • HAIII hard anodization aerospace aluminum

    • Waterproof

      • IPX-8 standard

    • Carrying method

      • Para-cord lanyard

      • Rigid nylon holster w/ retention device

    • Battery arrangement

      • Innovative slot load design

      • No battery tray or battery magazine needed

      • Battery arragement design patent pending in United Status, Hong Kong, and China

Output and Runtime

    • MT-G2 P0 LED

      • Four brightness levels (Regular mode)

        • Led lumen: 27505-2320/1220/205/35

        • ANSI FL-1 lumen: 23755-2006/1057/175/28

        • Runtime: 1.5/3.3/21/350 hours6

      • Two brightness levels (Tactical mode)

        • Led lumen: 27505-2320/281/Strobe I/Strobe II

        • ANSI lumen: 23755-2006/243/Strobe I/Strobe II

        • Runtime: 1.5/19 hours6

    • XM-L2 U2 LED

      • Four brightness levels (Regular mode)

        • Led lumen: 15055-1270/780/121/5

        • ANSI FL-1 lumen: 12455-1054/648/99/4

        • Runtime: 2.7/5/32/370 hours6

      • Two brightness levels (Tactical mode)

        • Led lumen: 15055-1270/372/Strobe I/Strobe II

        • ANSI lumen: 12455-1054/309/Strobe I/Strobe II

        • Runtime: 2.7/13 hours6

    • XM-L2 T6 neutral white LED has approximately 7% less output lumen compared to the cool white U2 LED.

    • Seven hidden auxiliary outputs7

      • Strobe/Strobe(Var)/Flash(Hi)/S.O.S.(Fast)/S.O.S./Becaon/Flash(Lo)

    • Testing above is performed by 3x18650. See other battery type runtime here.

Operations

    • Basic - Turn on the light by press and release the on/off button switch (<0.4s). To turn off the light, press and release the switch again.

    • For momentary on, press and hold the button switch for immediate output.

    • Twist the head to select between four output levels. You can pre-select the desired output level before turning on the flashlight.

    • Instant Turbo output - at any output level, press and hold the flashlight for 100% output. Release the button to return to previous level.

    • Instant Strobe output - at any output level (or off), double press and hold the on/off button switch for strobe output. Release the button to return to previous level (or off).

    • To access auxiliary levels, starting at head tight position (1st level), loosen to 3rd or 4th level and then tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.

    • (Programmable Features) Mode switching: To switch between tactical and regular mode, turn on the flashlight at 1st level, dial to 2nd level and then back to 1st level for ten times within five seconds.

    • (Programmable Features) Energy saving feature: Enabled by default, this feature reduces output current by 25% (or 10% when disabled) after 200 seconds at turbo mode. To toggle this feature, turn on the flashlight at 4th level, and dial to 3rd level and then back to 4th level for ten times within five seconds.


Controls

Other features

    • LED direct soldering on copper for maximum heatsink ability

    • User replaceable glass lens

    • Customizable energy saving feature

    • Battery reverse polarity protection

    • Tail stand

    • Extra tail-cap w/ switch for kit version

Warranty

Battery Safety Precaution

All EagleTac flashlights are designed to use “button-top” battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only EagleTac li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight.

Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.

NiMH rechargeable battery may release gas during discharge. If you experience an inflated switch boot or find high pressure being built inside the flashlight, switch off the flashlight immediately. Slowly loosen the tail-cap to reduce the internal pressure and replace all batteries. Back to top

Flashlight Maintenance

Periodically clean the threads and o-rings with a lint free cloth and apply a thin coating of EagleTac synthetic grease to the o-rings and threads. After prolonged exposure to moisture, the head and batteries should be removed, inspected, and dried. Do not touch or attempt to clean the reflector, as it will scratch the reflective coating permanently. Back to top

Other battery types runtime

Below lists the turbo output runtime with different battery types:

w/ energy saving enabled

XM-L2 U2 LED: (3xEAGTAC 3400mAh) 2.7hrs, (3xEAGTAC 2500mAh) 1.9hrs, (6xCR123A) 1.5hrs

MT-G2 P0 LED: (3xEAGTAC 3400mAh) 1.5hrs, (3xEAGTAC 2500mAh) 1hrs, (6xCR123A) 0.8hr

w/ energy saving disabled

XM-L2 U2 LED: (3xEAGTAC 3400mAh) 2.4hrs, (3xEAGTAC 2500mAh) 1.7hrs, (6xCR123A) 1.3hrs

MT-G2 P0 LED: (3xEAGTAC 3400mAh) 1.3hrs, (3xEAGTAC 2500mAh) 0.9hrs, (6xCR123A) 0.7hr

* Do not use six RCR123A as it may exceed the maximum voltage (i.e. 19V) that the LED driver can handle.

操作方法

    • スイッチON/OFF

      • スイッチを押してすぐに離すと通常点灯します、点灯時にスイッチを押してすぐに離すと消灯します

      • モーメンタリスイッチ - 消灯状態からスイッチを押しっぱなしにするとスイッチを押している間だけ点灯して、スイッチから離すと消灯する、いわゆるモーメンタリスイッチとして動作します、

    • 明るさ調整

      • ヘッドを最後まで締めた状態がTurbo、ヘッドを緩めていくとHigh、Mid、Loと明るさを4段階に切り替えできます。

      • 点灯中にスイッチを押しっぱなしにするとどの明るさの状態からでも押している間だけTurboモードになります、スイッチから離すと元のモードに戻ります。

      • スイッチをダブルクリックし、その二度目のクリック時に押しっぱなしにすることでストロボモードで点灯します、消灯状態からでも点灯状態からでも同様です。

    • 補助モード（特殊モード）

      • ヘッドを一番締めきった状態を1stレベル、そこから緩めていって明るさが変化する状態をそれぞれ2ndレベル、3rdレベル、4thレベルと呼びます

      • 1stレベルから3rd/4thレベルにまわしてすぐに1stレベルに戻すと補助モード（特殊モード）で点灯します、

      • 補助モード（特殊モード）状態で1stレベルから3rd/4thレベルにまわしてすぐに1stレベルに戻すを行う毎に補助モード（特殊モード）が切り替わっていきます

      • 補助モード（特殊モード）は以下のとおりです

        • ストロボ1→ストロボ2→点滅→SOS(高速)→SOS→ビーコン→点滅（Lo）→Turbo→最初に戻る

    • 標準設定とタクティカル設定

      • 標準ではヘッドを一番締めた状態がTurboで、そこから緩めていくことによりHigh-Mid-Loと明るさが切り替わりますが、タクティカル設定にするとヘッドを一番締めた状態がTurboで、そこから緩めていくことによりMid(明るめ） - ストロボ1 - ストロボ2と切り替わります

        • 標準設定：Turbo - High - Mid - Lo

        • タクティカル設定：Turbo - Mid(明るめ） - ストロボ1 - ストロボ2

      • 標準設定とタクティカル設定の切替方法

        • 点灯中に1stレベルから2ndレベルにゆるめてすぐに1stレベルに戻すを5秒以内に10回行う、

        • 戻すときも同じ、

    • 省エネ機能

      • 通常はTurboモードで点灯して200秒経つと自動的に出力を25%落としてバッテリーの消耗を抑えますが、これを10%ダウンに変更できます

      • 省エネ機能の切替方法

        • 4thレベルで点灯し、3rdレベルに切り替えてすぐに4thレベルに戻すを5秒以内に10回行います。