EagleTac GX25A3 公称スペック
投稿日: May 04, 2013 5:27:57 PM
Dimensions
Head Dia.
1.5 inches (38.5 mm)
Body Dia.
1.4 inches (35.5 mm)
Length:
4.3 inches (109 mm)
Weight:
5.2 ounces (148 grams)1
Battery Type
3xAA or 3x145002
1.5V alkaline/lithium, 1.2V NiMH, or
3.7V li-ion
Compatible battery diameter/length
Diameter: 14-14.6mm
Length:50-51.2mm
Read precaution with multiple AA batteries and li-ion batteries.
Operating voltage
2.7V - 13V
What's included
GX25A3 flashlight
Spare o-rings
User Manual
Mil-Spec Para-cord Lanyard w/ quick attachment clip
Tailcap with rear switch
Extra signal connection through the body tube (pre-installed)
Heavy Duty Nylon Holster w/ self-retention device and open-top design
LED
Cool White
CREE XM-L2 U2 LED
Neutral White
CREE XM-L2 T6 LED
Max output
LED lumen: 1116
ANSI FL-14 lumen: 915
Beam Profile
XM-L2 U2
Center lux: 20,100 lux
Center spot angle: 6°
Spill light angle: 57°
Beam distance: 311 yards / 284 meters
Lens
Waterwhite glass lens w/ harden treatment
Anti-reflective (AR) coating on both side (96% transparency)
LED circuit
C3000 ST
Synchronous buck w/ efficiency of up to 95%
Non-dimming constant current regulation for all output levels without flicking
Low battery voltage warning7
Energy saving feature5
(user adjustable to prolong runtime)
Very low standby current (uA)
Reflector
Smooth aluminum reflector
Material
HAIII hard anodization aerospace aluminum
Waterproof
IPX-8 standard
Carrying method
Para-cord lanyard
Rigid nylon holster w/ retention device
Battery arrangement
Innovative slot load design
No battery tray or battery magazine needed
Battery arragement design patent pending in United Status, Hong Kong, and China
Output and Runtime
Three brightness levels (Regular mode)
Led lumen: 11165-1015/365/10
ANSI FL-1 lumen: 9155-832/301/9
Runtime: 1.3/3/100+ hours6
Two brightness levels (Tactical mode)
Led lumen: 11165-1015/224/Strobe
ANSI lumen: 9155-832/185/Strobe
Runtime: 1.3/5 hours6
XM-L2 T6 neutral white LED has approximately 7% less output lumen compared to U2 LED.
Seven hidden auxiliary outputs7
Strobe/Strobe(Var)/Flash(Hi)/S.O.S.(Fast)/S.O.S./Becaon/Flash(Lo)
See other battery type runtime here.
Operations
Basic - Turn on the light by press and release the on/off button switch (<0.4s). To turn off the light, press and release the switch again.
For momentary on, press and hold the button switch for immediate output.
Twist the head to select between three output levels. You can pre-select the desired output level before turning on the flashlight.
Instant Turbo output - at any output level, press and hold the flashlight for 100% output. Release the button to return to previous level.
Instant Strobe output - at any output level (or off), double press and hold the on/off button switch for strobe output. Release the button to return to previous level (or off).
To access auxiliary levels, starting at head tight position (1st level), loosen to 3rd level and then tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
(Programmable Features) Mode switching: To switch between tactical and regular mode, turn on the flashlight at 1st level, dial to 2nd level and then back to 1st level for ten times within five seconds.
(Programmable Features) Energy saving feature: Enabled by default, this feature reduces output current by 45% (or 15% when disabled) after 200 seconds at turbo mode. To toggle this feature, turn on the flashlight at 3rd level, and dial to 2nd level and then back to 3rd level for ten times within five seconds.
Controls
Other features
User replaceable glass lens
Customizable energy saving feature
Battery reverse polarity protection
Tail stand
Extra tail-cap w/ switch
Warranty
Ten years performance guaranteed warranty