Blimp Wings
RS90 - a blast from my past
Completed on 11/3/23
Motowhoop - this thing is so loud and heavy - is it really a whoop?
Completed on 10/30/23
Twlhd - first quad on wtfos after a multi year hiatus.
Completed on 10/17/23
Demon34 - my first ritewing which isn't a drak of some sort
Completed on 5/25/22
Goblin - still going through the backlog of old planes
Completed on 4/18/22
Nano Goblin v2 - built another version of the nano to have another small digital wing which doesn't have the bad stall characteristics of the ripper
Completed on 3/23/22
Reptile Dragon - finally getting around to building it
Completed on 2/20/22
Nano Drak w/Boom - testing out the extended wings with boom
Completed on 1/27/22
Ripper - first DJI fpv wing
Completed on 12/20/21
dolphin - comparing different 800mm wings
Completed on 12/4/21
radjet - lighter and faster?
Completed on 11/1/21
mini drak - bought this used and spent some time fixing it up
Completed on 10/26/21
nano drak - took almost a full month to complete
Completed on 10/3/21
ng580-f8022 - need to compare apples to apples to figure out the f80 motor
Completed on 9/11/21
fj650-f8022 - funjet scaled down to 650mm (retired - crashed into the river)
Completed on 9/6/21
ng580-2726 - planks vs wing speed test (retired - smoked ESC/motor with 5.5" prop)
Completed on 7/8/21
dw80-27166v2 - rebuilding and getting more experience with lamination
Completed on 7/3/21
w60-2726 - building another wing to share quad sized batteries with
Completed on 6/17/21
NG2423iv3 - rebuilding an old favorite with doculam laminating film (retired - didn't fly well)
Completed on 6/5/21
NSKY-2205 - scratch built version of the sonicmodell skyhunter 780mm plane.
Completed on 5/6/21
NG580-2205 - a close duplicate of the nano goblin wing shape to replace ng2423iv2
Completed on 4/23/21
Nano Goblin - comparing the real nano goblin with the scratch builds
Completed on 4/16/21
DF Mini Spirit - 470mm wing for long range? (retired)
Completed on 3/31/21
NG610-2423 - 610mm version. Trying to find the best size.
Completed on 3/16/21
NG650-2423 - 650mm version of the NG2423 for 3s li-on packs. (retired)
Completed on 3/10/21
Micro T v2 - fun driving around the house
Completed on 2/25/21
G25 game wheel to PPM - driving RC cars around the house, anyone?
Completed on 2/17/21
FpvRadar - airplane detector/radar for safer flying
Completed on 2/4/21
Logitech joystick to PPM - controlling flying crafts using a joystick
Completed on 1/29/21
ng2423iv2 - another goblin with a full airfoil instead to see the difference in performance (retired)
Completed on 1/10/21
ar6 - ar mini wing
Completed on 1/4/21
ng2423i - inav version of the new airframe
Completed on 12/27/20
ng2423 - a new airframe based off the nano goblin.
Completed on 12/10/20
sfw2523v2 - rebuilt a new airframe with a carbon spar in the middle this time.
Completed on 12/7/20
dw6-2423 - testing motors for a medium range 600mm class wing
Completed on 12/7/20
dw8-27166 - 800mm wing for sharing 4s 5" quad batteries (retired)
Completed on 12/2/20
mig4740 - a mig 29 chuck glider conversion. The power weight ratio is pretty high, so it should fly like a rocket.
Completed on 11/24/20
sfw2523s - shorter 570mm wings to improve performance
Completed on 11/23/20
sfw2523 - built for more testing with this wing design (retired - wing structural integrity weakened from 4s)
Completed on 11/13/20
sfw2523i - testing out the 2205 2300kv motors on the swept forward wing. hopefully it can fly slower than the 2306 version.
Completed on 11/3/20
w4740iv2 - rebuilding the previous wing (retired - too much damage from crashes)
Completed on 10/28/20
w4745-inav - another sub 250 gram short range fpv explorer with more power than the last one (retired due to crash)
Completed on 10/20/20
ktal2 - karearea talon v2 indestructible frame
Completed on 10/1/20
sfw2423 - rebuilding tw2423 into a swept forward wing design instead
Completed on 9/20/20
vt2750 - my first hybrid quad/vtol based on the mini qbit project
Completed on 9/16/20
tw2423 - my first tapered wing design (retired - stalls easily)
Completed on 9/12/20
Floss23627 - building a daily driver
Completed on 9/8/20
sfw-23627 - trying to improve on the pw2423 but making something faster with better handling
Completed on 9/1/20
Cham23627 - Chameleon frame with 2306 motors
Completed on 8/28/20
Eagle380 - a different type of project to break up the monotony of wings
Completed on 8/22/20
I-Hawk v2 - rebuilding the original with all new electronics
Completed on 8/15/20
w6-2523 - a similar wing as the previous except with a larger 2205 motor
Completed on 8/14/20
w6-2423 - my first GPS wing. slight increase in size to 600mm. (retired - destroyed)
Completed on 8/6/20
Drago - taking a brief break from fixed wings to rebuild another 5"
Completed on 8/2/20
pw465v3 - Tried another rebuild to reduce weight
Completed on 7/30/20
pw465 - a differential thrust plank wing with gps (retired due to too much damage)
Completed on 7/22/20
pw3635 - a plank wing with a very tiny sweep from a new design I just drew up
Completed on 7/17/20
adhd1440v2 - slightly larger fpv version of the original at 40g dry
Completed on 7/13/20
sfw2423 - swept forward wing design taken from the zohd dart (retired due to damage in storage)
Completed on 7/5/20
adhd70320 - my lightest aircraft to date at 29g
Completed on 6/30/20
pblue2 - putting a crazybee into a epp glider
Completed on 6/23/20
skyrider - turning the walmart glider into a fpv plane
Completed on 6/17/20
cdb280 - testing out a fun canard design
Completed on 6/4/20
db86228 - playing with dual boom planes again
Completed on 5/29/20
w3635kfci - testing out inav instead of betaflight this time (retired - incompatible hardware)
Completed on 5/20/20
ak455v2 - another copy of the 5500kv build
Completed on 5/1/20
w3635kfc - first wing with a flight controller using betaflight (retired - used parts to build w3635-inav)
Completed on 4/17/20
w475 - testing out a smaller wing (430mm) with 1104motors (retired)
Completed on 3/29/20
W-3631k - testing out the KF airfoil against an otherwise identical wing with a conventional airfoil
Completed on 3/19/20
W-2423 - testing out the king kong 2204 2300kv motors
Completed on 3/12/20
W-86228 - trying out the 1806 2280kv motors on the new series of frames
Completed on 3/12/20
W-3631 -rebuilt the W-3462 with a new 1306 3100kv motor. (Retired - wing snapped during 4s flight)
Completed on 3/9/20
W-3462 (cooked the motor) - 540mm wing with LDARC 1304 6200kv motors.
Completed on 3/8/20
ET-3462 - rebuilding the Egg3046 with a better board (burned down after a crash)
Completed on 2/15/20
AK-555 - Mamba 1105s again on a lighter frame this time
Completed on 2/7/20
AK-2450 - 1204 on the AK frame
Completed on 2/5/20
AK-660 - testing the old 1106 6000kv motors
Completed on 1/30/20
AK-475v3 - another duplicate since I keep smashing these. (Retired - I switched it over to 5500kv motors instead)
Completed on 1/23/20
AK-455 - trying out the LDARC 1104 5500kv motors
Completed on 1/2/20