Set spectrum referencing
This popup allows the user to change the referencing of single or multiple spectra at once. The reference point and dimension are taken from the position in the Window side trace where this popup was opened. The user can set a new reference ppm at this point, and if desired can apply the changed referencing directly to other spectra with the same axes.
The Set spectrum referencing popup.
Selected spectrum
Experiment
The experiment name of the selected spectrum.
Spectrum
The spectrum from which the reference point was chosen.
Dimension
The dimension in which the reference is set.
Chosen reference point
The chosen reference point in the dimension that is re-referenced.
Current reference ppm at this point
The current reference ppm at the chosen reference point.
New reference ppm at this point
Specifies the new reference ppm at the chosen reference point.
All spectra table
This table lists all spectra that have the same dimension as the dimension that was chosen for re-referencing. Changing the reference of any of the spectra in this list with the same amount can be done by setting the |Change referencing| to 'Yes'.
Experiment
The experiment name.
Spectrum
The spectrum name.
Dimension
The dimension in which the reference is set.
Reference point
The reference point in the dimension that is re-referenced.
Reference ppm
The reference ppm at the reference point.
Change referencing
If set to 'Yes', the spectrum will be re-referenced according to the settings above.
OK
Changes the referencing for the selected spectra and closes the popup.
Cancel
Closes the popup without changing the referencing.