Overview

• Sheeting (Unprinted Sheets) can be calculated from Sheets or from Reels. 

• The Work Size and Max Size are set to the Part Size

• When using Reels, the Sheet Depth assumes the Work Depth.

• When Ink = Not Printed, the following happens:

  1. Bleed is hidden on Parts. (Bleed is also cleared by default.)

  2. The Press and Running Options have limited fields for Min/Max size, Setup Time and Speed.

Setting Up

Printing Types

• Description: Sheeting (Can be anything)

• Size from: Parts

• Run Type: Sheetfed - Sheets/hr; Web - m/hr; Web - Sheets/hr

• Ink: Not Printed

• Substrate Category: Select a Material Category - Sheets or Reels.

Setup a Press (e.g. Guillotine) which is used for sheeting from a Reel or cutting to size from a stock sheet.

Sheeting (Sheet to Sheet)

• In this model, we assume you are guillotining a big sheet down to smaller sheets.

• Require Max Depth and Width.

Sheeting (Reel to Sheet) 

• In this model, we assume you are sheeting a Jumbo Reel one across and the Width of the Reel becomes the Width of the Cut Sheet.

• Require Max Depth and Width.