Here, I had a lot of fun creating ten ideation designs for my speaker. My three favorite designs are numbers 1, 5, 11, and 6. I'm leaning towards the robot and the TV.
Here are 4 of my most useful post it notes that I received. I really liked these post it notes because of how positive the feeback was for one but two they also challenged me to sort of start thinking outside of my confort zone and possibly not just pick the design that would be easiest for me to complete but pick the coolest design that also gives me some challenege. A lot of people also liked the hands design so I might try it out.
Here is my phase 2 design drawing. I decided to go with the TV idea and am really excited to get started. I decided to do the tv over the hands because I had a little bit more freedom in adding things to my tv like little screens and buttons and stuff that I couldn't do with the hand as they were sort of the main creative feature and I believe that this is an excellent creative design because of just that. I've added here the different materials I will be using and the rough measurements of my design. One way I'm challenging my skillset is by choosing a design that features a ton of different materials and intricate designs that will not be easy to make but I believe I can.
So far, I've created a Rhino render of my TV design, but I haven't made it to scale yet. I just wanted to sort of get the idea down and get a sense of what it's going to look like, and I think that now I can say I'm halfway. Some next steps for me will be to create my to-scale cardboard design and keep brainstorming different ideas for my TV!
Here is my TV idea created with cardboard. I learned that I need to be more accurate with my cardboard moving forward, possibly using the laser cutter to create a more accurate design. I do need to adjust the digital project opening a bit so that it's actually accurate.
Well, I struggled with getting music to play at first and I couldn't understand why because all of my schematics were correct. Realized it had to do with my soldering and was able to fix it. It helped me understand the improtance of soldering and how it can either make your circuit play music or not play music. I had no idea what the light was doing but it just said that the purpose of the light was to tell me if the entier circuit was working or not.
I worked with Julia A. on this project. Something I learned about the circuit during this process was that the schematic shows how the audio signal is routed through different components before reaching the speaker, which I thought was interesting.