Go-E Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here
Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL accordingly.
⚠️ IMPORTANT:
The firmware of the station must contain at least version 055.0.
If you activate the charging station with an RFID card, the charging process must be terminated on the car side.
Install the Go-ECharger app on your cell phone.
Now connect your charging station to the app (setup via hotspot or internet).
As soon as the charging station can be found in the app, please make the following settings.
4. go to the settings
7. return to the overview and select Internet
12. after the URL necessarily / (&) any x addition.
13. save and restart
5. select access control
8. Check firmware status !
9. select OCPP
6. authentication required and save
10. activate OCPP 1.6
11. add URL from your account
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)