Embedded Files
Backend Integration Guide
Backend Integration Guide
Kostad Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here
Integration of OCPP stations
Integration of OCPP stations
Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL accordingly.
Integration of the Kostad DC-Wallbox (CPC20)
Integration of the Kostad DC-Wallbox (CPC20)
Logge dich ins Service Menü ein. Benutzername und Passwort entnimmst du bitte aus der Bedienungsanleitung.
⚠️ Important: the station must communicate with the internet (LAN, WLAN etc.).
Station Configuration
Station Configuration
Select OCPP:
Host name: www.ecarup.com/
HTTPString: api/OCPP/................/
Please check again: no spaces and a "/" at the end.
Copy the connection data. If the connection was successful, the status is "green".
Please note the following setting: "Operator settings 1".
If authentication is to be done via eCarUp (App or RFID card), the following adjustment must be made:
For authentication, it must be switched to OCPP.
Kostad DC Unity 50, 90, 120, 150, 180, 300 & 360 kW
Kostad DC Unity 50, 90, 120, 150, 180, 300 & 360 kW
Integration of these systems is carried out by:
Kostad Schweiz AG.
+41(0) 52 625 50 50
office@kostad.ch
office@kostad.ch
Advanced setting via maintenance tool (eCarUp Premium)
Advanced setting via maintenance tool (eCarUp Premium)
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)
Page updated
Report abuse