Charge Amps Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here
Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL accordingly.
⚠️ Important: The firmware of the station must contain at least version 158
Access the following page and register there: https://my.charge.space
If you are logged in, you can add your HALO Wallbox via the Profil .
Then go to the menu item "Remote Control" and activate the RIFD lock.
⚠️ ATTENTION: This lock must be done BEFORE the OCPP implementation!
Turn on your HALO
Use a smartphone for this and go to your WLAN settings.
Select the Hotspot of the HALO-Wallbox (HALO_serial number)
Open your browser on the smartphone and enter the following IP address: 192.168.250.1
The HALO setup page will open.
Enter the required password. You can find the password on the supplied letter from Charge Amps.
At the settings click on the menu arrow (top right)
Under the menu item Wi-Fi the station can be connected to the desired WLAN
Select the menu item "OCPP
The eCarUp URL must now be entered. Afterwards click "Update" and restart the wallbox.
Example of a URL: ws://www.ecarup.com/api/Ocpp16/xxxxxxxxxxxxxx
Access the following page and register there: https://my.charge.space
When you are logged in, you can add your Aura Wallbox via the profile.
Then go to the menu item "Remote control" and activate the RIFD lock. Please do this for both Connectors!
⚠️ ATTENTION: This lock must be done BEFORE the OCPP implementation!
Switch on your AURA
Use a smartphone and go to your WLAN settings
Select the hotspot of the AURA wallbox (AURA_Serial number)
Open your browser on your smartphone and enter the following IP address: 192.168.250.1
The AURA setup page opens
Enter the required password. You will find the password on the letter supplied with Charge Amps.
In the settings click on the menu arrow (top right)
Under the menu item Wi-Fi, the station can be connected to the desired WLAN.
Select the menu item "OCPP
The eCarUp URL must now be entered. Then click "Update" and restart the wallbox.
Example of a URL: ws://www.ecarup.com/api/Ocpp16/xxxxxxxxxxxxxx
The standard configuration of the AURA is that it can only be released again after the charging process has been completed by means of an RFID card. (Decoupling of the plug)
This means that if you end the charge on the car side, the mechanism of the station for the plug is not automatically released.
This can be remedied by means of our maintenance tool (eCarUp Premium), proceed as follows:
Parameter Get Configuration and the key is UnlockConnectorOnEVSideDisconnect (default to false).
Parameter for the change Change Configuration and again with the key UnlockConnectorOn EVSideDisconnect + Value set to true and save with Set.
1.
2.
Important: tested firmware version, 1.3.5
Go to the following page and register there: https://my.charge.space
Once you are logged in, you can add your Dawn Wallbox via the profile.
Then go to the menu item "Remote control" and activate the RIFD lock. Please do this for both connectors!
⚠️ ATTENTION: This blocking must be done BEFORE the OCPP implementation!
Switch on your Dawn.
Use your smartphone for the integration and install the Charge Amps installer app
Open the app and start a search (via Bluetooth). Important, this can only be done in the first 10 minutes when the station is powered.
4. connect the charging station to the desired medium (Wlan or LAN)
5. go to CPMS and click on edit
6. click on Connect to ohter CPMS to place the eCarUp URL
7. type in the eCarUp URL from your account manually.
Example: ws://www.ecarup.com/api/Ocpp16/xxxxxxxxxxxxxx
8. click on Connect
8. a confirmation appears
9. check the overview including the status of the connection.
10. confirm and finalise configuration.
11. the station will now appear in your eCarUp account.
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)