Backend Integration Guide
Ebee Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
- Prerequisite for integration via OCPP
- Configuration in the web portal for station operators
- Learn more about our premium functions here
Preparatory steps for the integration of OCPP stations into the eCarUp Cloud
Your charging station is installed and your computer or smartphone is in the same network as the charging station
You have created an account in the eCarUp app
Log into the eCarUp web portal with your account data and click on the "OCPP" tab in the menu on the left under Stations
Copy the URL to the clipboard and store it at the desired station in the web interface.
The following charging station types compatible with eCarUp have a built-in Bender Controller
Integration into the eCarUp portal
1. connect notebook to Bender Controller via USB cable:
Important: Use the micro USB interface
2. Open the browser on the notebook
Enter the following URL: http://192.168.123.123/operator/
Default user name: operator
Default password: yellow_zone
3. Check firmware version:
At least version 4.00-2139 must be installed.
The latest version can be found under State -> Firmware Version.
Carry out the firmware update:
a) Copy the firmware file to a USB stick. Insert the USB stick.
b) Restart the Bender Controller
4. Configure Bender
OCPP Mode: OCPP-J 1.6
WebSocket JSON OCPP URL: ws://www.ecarup.com/api/Ocpp16/{ecarupID}/
Example: ws://www.ecarup.com/api/Ocpp16/D8D2AFE54EF4D508/
Important: A "/" must be added after the eCarUp OCPP URL (as shown in the example). In addition, the "ChargePoint ID (OCPP)" must not contain any special characters.
Advanced setting via maintenance tool (eCarUp Premium)
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)
