GL Charge

Deutsch

Backend Integration Guide

GL Charge Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.

Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here

Integration of OCPP stations

Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL accordingly.

LiteBox

Firmware Version: A0-GL-V2.0.5-b4

Install the App CP Tool
testet Version of the App V. 1.12.2

Step 1

Search for the charging station in the CP Tool and select it.
Enter the password (default: 12345678)
Click Enter

Step 2

Establish the desired connection to the Internet

Step 3

Server URL: Manual Entry
URL from your eCarUp account

Example: ws://www.ecarup.com/api/Ocpp16/xxxxxxxxxx

Charger ID: can be freely defined

Step 4

Click on Set at the end.
Restart the station.
The station should now communicate with your account.

PublicBox & GlowBox Platinum

Firmware Version: 0.20/6,1.8,2.8

Integration

Before you can configure the charging station, you must have access to the web interface.

Connect a PC to the station via Ethernet.

2. Set the following address locally on your interface:

IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0

3. Go to the browser and enter the following URL: http://192.168.1.2.

4. Log in to the web interface as follows:

Username: installer
Password: installer

OCPP Configuration

Navigate to the OCPP Settings
Enter your eCarUp URL for the OCPP host:

Example: ws://www.ecarup.com/api/Ocpp16/xxxxxxxxxx/Seriennummer

⚠️Wichtig, after the URL / + do not forget the serial number.

Click on Apply and the station will restart.

Advanced setting via maintenance tool (eCarUp Premium)

The upload interval of the Meter Values may vary from station to station.

We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.

You can change this as follows:

Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)

Page updated

Report abuse