Embedded Files
In order to be able to use the full scope of eCarUp and the gold partner functions, this requires a deeper cooperation with us.
For more information, please contact our sales department (verkauf@ecarup.com).
Auto-Export (User)
Auto-Export (User)
With the eCarUp User Export function you are able to transport user-based transactions from the eCarUp portal directly into IS-E.
With the eCarUp User Export function you are able to transport user-based transactions from the eCarUp portal directly into IS-E.
The following points are important for this:
The driver must be known and stored with the price 0.00.-.
Define a station group in which the driver can move or load.
A server (FTPs or SFTP) must be available on your side.
1. define the destination of the auto-export
1. define the destination of the auto-export
When configuring the tabs in the auto-export, proceed from right to left (analogous to smart-me)
Select Destination in the menu
Then you can set up the server for all auto-exports at eCarUp once (SFTP / FTPS).
For SFTP the port is always 22
For FTPS the port is always 21
2. setting up the formatting of the auto-export
2. setting up the formatting of the auto-export
Then select Format (also a one-time setup).
The following can be defined for the metering code:
DeviceLocationID: Identification number in IS-E
FactoryNo: Manufacturing number
InternalNo: Internal number
Metering Code: defined code for the meter/counter
New: The Obis code can now be selected and defined between 1.8.0 and 1.9.0.
1.8.0 = Virtual counter reading
1.9.0 = Feed rate
We recommend that you discuss these settings with the person responsible for IS-E in your organisation.
3. define tasks of the auto-export
3. define tasks of the auto-export
Then select Task. Here you define for which user and which ward group the data are exported. A task must be set up for each auto-export.
Define the eCarUp user (via the email address used for the eCarUp account).
Select the corresponding station group
Then insert the format and destination - which have already been defined in steps 1 and 2 beforehand
Set the upload interval
Finally, check whether the status at the back right changes to "OK", then the data are exported to the server.
Important: The consumption of the station data is exported with the OBIS code 1.9.0 (virtual meter reading).
Of course, the full range of functions is not finalized and the eCarUp Gold Partner automatically benefits from future features.
Test File Auto Export
XML File Auto Export eCarUp.pdfPage updated
Report abuse