Backend integration guide
Siemens stations can be integrated into the eCarUp billing system in just a few steps and free of charge. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions
Preparatory steps for the integration of OCPP stations into the eCarUp Cloud
Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL accordingly.
SiCharge CC AC22
Integration of the SICharger
Connect to the station with Ethernet
Your laptop must have the following IP 192.168.32.10 and subnet mask: 255.255.255.0.
Open the browser of your laptop and enter the following URL in the address bar 192.168.32.1
Username is "admin", password is the serial number of the system
Web Interface
Server profile on Production
Protocol Version OCPP 1.6J
Paste the URL of the account
In User Management under Authentication, the point at OCPP (managed) must be set in the whitlist.
Save and restart
Connection via SIM card
Siemens supplies an M2M SIM card with the charging station. The following setting still needs to be made:
Authentication Method on PAP
Service mode on Auto
VersieCharge AC 22kW
Preparatory steps for the integration of VersieCharge
Install the Sifinity Go app on your cell phone
Now connect your charging station to the app (setup via Bluetooth)
Tested firmware version: V2.132.29
3. the station operator must then send the URL including the serial number of the station to the following e-mail for integration:
Siemens will contact you as soon as possible to ensure successful integration.
SiCharge D
To integrate the SiCharge D, the URL + serial number of the station must be sent to the following e-mail:
Siemens will contact you as soon as possible to ensure successful integration.
Advanced setting via maintenance tool (eCarUp Premium)
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)