Circontrol Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here
Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL accordingly.
The first steps have to be done directly on the display of your station:
Connect your laptop to the station
Please take the current IP address of the station from the enclosed manual
Then enter the IP address in the web browser
Dashboard of Circontrol appears
Select connection type (GSM, LAN...)
Please note the following:
When the station is delivered, it is possible that the default setting is Plug&Charge. This must of course be deactivated beforehand.
Please contact BIBUS or Circontrol for the tool.
For this the Charge Point Manager must be installed and the settings look like this:
Status must be set to Enabled
Integration
Select OCPP 1.6J
LINK (click)
Username & password can be found in the manual
For the Charge Box, the station name must be defined. X-any name
(attention without space)
Enter the OCPP URL of your account under Central System.
⚠️ Important: Metervalue sample interval (s) must be set to e.g. 60
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)