To use the maintenance function, you need an eCarUp Premium license.
Maintenance allows to perform advanced configurations and diagnostics of OCPP stations. This is to detect and fix faults of OCPP stations.
The maintenance function is compatible with all OCPP- charging station in the eCarUp system.
Unlock Connector The cable on the station is unlocked.
Reset Device The software of the station is restarted, ATTENTION: active charging processes are interrupted.
Get Configuration The current configuration of the station is displayed
Change Configuration The configuration can be changed
Get Diagnostics A current error report is output (ext. server required)
Firmware The current firmware version is displayed (ext. server required)
Important: for this to work, the station must support the commands.
We need the MeterValues at regular intervals so that the charging power can be displayed in the app.
The upload interval of the meter values can vary from station to station. We recommend an interval between 30-60s.
You can change this as follows:
Get Configuration (to read out what is programmed)
Change Configuration (to overwrite the value)
To ensure that the correct charging power is displayed in the app, we also need the value Power.Active.Import in the MeterValues.
The query for a charging station can look like this:
In the query, we have seen that the value "Power.Active.Import" is missing.
Now we add the missing value to the Change Configuration as in the example below and click on Set.
Would you like to have the cable permanently locked to the charging station?
The following value can be queried:
Plug the cable into the station and set the value to false via the ChangeConfiguration.