Embedded Files
Backend Integration Guide
Backend Integration Guide
ABL Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here
Integration of OCPP stations
Integration of OCPP stations
Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL accordingly.
Configuration of the ABL Wallbox
Configuration of the ABL Wallbox
⚠️ Important
⚠️ Important
You need to connect a vehicle to start the charging process. Otherwise, no charging process will be initiated.
If charging is started with the RFID card, charging can only be terminated via the car (e.g. unlocking the cable) or via the eCarUp app. Holding the RFID card against the reader does not end the charging process.
Access the station
Access the station
As soon as you have connected to the station select the following IP in the browser: http://169.254.1.1:8300/
Check in the system data whether the most current software version is installed
Configuration
Configuration
Change OCPP version to 1.6
Insert the entire URL from the eCarUp account (preparatory step 4)
Rename ChargeBox ID. Attention: no spaces allowed
Save and restart the station.
Important
Important
The chargebox ID must not contain more than 20 characters.
Important
Important
Please deactivate the Auto-Charge function
Advanced setting via maintenance tool (eCarUp Premium)
Advanced setting via maintenance tool (eCarUp Premium)
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)
Page updated
Report abuse