KEBA

The KEBA P30 x-series charging station can serve as a master for KEBA P30 c-series charging stations.

Deutsch

Backend Integration Guide

Keba Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.

Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here

Keba Ladestation

Integration of OCPP stations

Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL accordingly.

Integration of the Keba Wallbox KC-P30 X Series

KEBA Measurement & Calibration Law in Germany

With the KEBA ME charging stations, semi-public and public charging processes can be easily billed by credit card using eCarUp in accordance with the applicable measurement and calibration regulations. Read more: Calibration law in Germany.

Important: Note Keba Circular

We are contacting you with important information about a software issue that has been identified in the KeContact P30 x-series, version 1.18.1.

Our team has identified that following an update to version 1.18.1, duplicate charges may be immediately re-sent to the backend system. These duplicates could lead to incorrect billing for your end customers.This problem will be fixed with the upcoming software version 1.19.We sincerely apologize for any inconvenience and thank you for your support in ensuring a reliable and transparent charging experience for all users.

Your KEBA eMobility Team

Important: Firmware Verison !

In order to install your KEBA x-series charging station (also M&E / firmware version: 1.9.1 or newer / latest software always at KEBA downloads) into an eCarUp account, the following preparations must be made:

Integration of the x-series

Connect your computer to the station's IP address. The IP address is shown on the display of the station.
Please log in:

Default user name: admin

Default Password: Keba_xxxx (serial number of the station)

Now make the following settings under OCPP:

Chargepoint Identity: "Station names"

Attention: the station name (Chargepoint Identity) must not contain any spaces or special characters - with the exception of the underscore "_". After successful integration on the eCarUp platform, the station can be easily renamed.

OCPP Communication Type: "OCPP 1.6 JSON"

Central System Hostname: "www.ecarup.com"

Central System Port: "80"

Central System Path: "api / Ocpp16 / {code from the ecarup website}". You saved this in step three in the preparation (see above).

4. Device configuration

Menu: Configuration --> Devices (page build-up takes a while)

Authorisation: AN

Online Authorisation Mode: First Online

Note: If your company supports a proxy in the system, you can make these settings directly on the KEBA station.

The KEBA x-series charging station is now registered in your eCarUp account. Now you can define the terms of use of the charging station in the eCarUp web portal.

Integration of the c-series

KEBA c-series charging stations can be installed as slaves of KEBA x-series charging stations. Just as with the x-series, you can easily define the terms of use of your stations yourself as soon as it is installed in your account. You decide who can charge, when and at what price.

Set the DIP switch "DSW2.5" to "On" in the secondary station
Connect your computer to the IP address of the primary station (the x-series KEBA charging station).

Default user name: admin

Default password: Serial number of the KEBA x-Series charging station

3. Now make the following settings under OCPP:

Under Operation Mode, switch to Charging Network

Enter the number of secondaries

Enter the serial number of the secondaries

Advanced setting via maintenance tool (eCarUp Premium)

The upload interval of the Meter Values may vary from station to station.

We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.

You can change this as follows:

Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)

Page updated

Report abuse