Backend Integration Guide
Teltonika Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
- Prerequisite for integration via OCPP
- Configuration in the web portal for station operators
- Learn more about our premium functions here
TeltoCharge
Preparatory steps for the integration of OCPP stations into the eCarUp Cloud
Your charging station is installed and your computer is in the same network as the charging station
You have created an account in the eCarUp app
Log into the eCarUp web portal with your account data and click on the "OCPP" tab in the menu on the left under Stations
Copy the URL to the clipboard and store it at the desired station in the web interface.
Telto-Charge
Preparatory steps for the integration of Teltonika
Install the Teltonika Energy App on your mobile device.
Connect your charging station with the app (setup via hotspot or internet).
As soon as the charging station can be found in the app, please make the following settings.
Important
The station was successfully tested with firmware version v1.8.11.
Currently, the power display in the eCarUp app fluctuates significantly. A solution is being searched for.
Selecting a connected station
2. Click on the cogwheel at the top right
3. Select connectivity
4. Select OCPP
5. Add OCPP URL
Important:
OCPP URL from your eCarUp account
Add / to the end of the URL.
Save
Advanced setting via maintenance tool (eCarUp Premium)
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)