SCAPO

Deutsch

Backend Integration instructions

Scapo Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.

Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here

Integration of OCPP stations

Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL accordingly.

Integration of the SCAPO Vision & SCAPO Comfort

Open the network and internet settings of your PC
Here you must assign a static IP address
Please take the login data as well as the IP address from the supplied manual
Firmware must contain at least version : BE-05.01.01 or BE-03.02.12

Web interface

Backend

Go to the ‘Network’ menu
Select OCPP-J 1.6
Desired medium for communication
OCPP Vendor must not contain a space
The websocket must be taken apart

Websocket from eCarUp

Store using the print screen
Please note at the end, api/Ocpp16/weoih48zlkuhr9/00000010638

⚠️ Important do not forget / (slash) + 00000010638 (serial number of the station) at the end!

Currently only the WS connection works.

You can find the serial number of your wallbox as follows:

If RFID cards are used, please set the following parameters:

Advanced setting via maintenance tool (eCarUp Premium)

The upload interval of the Meter Values may vary from station to station.

We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.

You can change this as follows:

Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)

Page updated

Report abuse