Embedded Files
All ABB stations with backend functionality can be integrated into the eCarUp backend. Existing ABB charging stations can also be migrated to eCarUp.
Backend Integration Guide
Backend Integration Guide
ABB Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here
Integration of OCPP stations
Integration of OCPP stations
Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL accordingly.
Configuration of the ABB Stations
Configuration of the ABB Stations
ABB Terra AC Wallbox
ABB Terra AC Wallbox
To integrate the ABB Terra AC Wallbox, the following steps must be taken (once) by ABB:
Create TerraConfig portal account. Application via https://forms.abb.com/form-39881/Antrag-Connected-Services-AC-Terra)
Create app account in the portal
Add eCarUp URL via the ABB portal
Attention: No special characters and spaces in the third party name!
Without password
TerraConfig Portal
Then proceed as follows on the ABB TerraConfig app:
Then proceed as follows on the ABB TerraConfig app:
Log in with the app (ABB) account on the TerraConfig app
Connect to the station via Bluetooth (requires the supplied key)
Tested with software version 1.6.9
New configuration
2. Work through the steps from 1-5
2.1 Select the desired connection type
2.2 Deactivate free loading
2.3 OCPP configuration (explained in more detail)
2.4 Activate external RFID cards
2.5 Always confirm configuration
2.3 OCPP configuration
2.3.1Enable external server
The URL that was added in the web portal can be selected here.
2.3.2 Add custom URL, the OCPP URL can be added manually here.
Select and configure the OCPP server
Confirm OCPP server configuration
Save the entire configuration and restart.
Old Version
Old Version
Then proceed as follows on the ABB TerraConfig App:
Then proceed as follows on the ABB TerraConfig App:
Log in with the app (ABB) account on the TerraConfig app.
Connect to the station via Bluetooth (requires supplied key)
Watch the Video or follow the steps below to finish the integration.
OCPP Server
2. Tap "+"
3. Pre-set URL appears
4. Tap "Next"
5. Enable external acces
6. Finish with "OK"
⚠️ If the RFID cards do not work, you need to "active external cards" in the Terra Config app.
Important:
Important:
If the RFID cards do not work, you still need to make the following setting at the station via the Terra Config App:
Possible barriers for unsuccessful activation via RFID card
Possible barriers for unsuccessful activation via RFID card
If the station sends us an authorization request with the serial number, this means that the station is still in Free Vending mode. Please deactivate this mode under the Device Mode in the TerraConfig App.
ABB Terra DC (Wallbox and fast charging stations)
ABB Terra DC (Wallbox and fast charging stations)
DC charging stations have to be connected to the eCarUp backend by ABB. Please contact them directly with the station and your OCPP URL (from the web portal):
The migration will be confirmed by e-mail.
Afterwards the station is created in your eCarUp account and you can adjust the settings. Find more information in Backend.
Advanced setting via maintenance tool (eCarUp Premium)
Advanced setting via maintenance tool (eCarUp Premium)
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)
Page updated
Report abuse