CTEK Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here
Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL accordingly.
Important!
To perform the first steps you need to install a driver on your PC from CTEK (applies to Windows).
Connect your laptop to the station (via mini USB port)
The following URL must be entered, http://192.168.7.2
Username and password are ccu
Dashboard of CTEK appears
Select connection type (GSM, LAN...)
Setup must be changed to Advanced.
Select OCPP 1.6J as communication protocol.
At the backend endpoint copy eCarUp URL from your account into it.
The time synchronization is obtained from the OCPP backend.
5. Set the sample interval to 60 seconds.
6. Make sure that the authentication mode of the outlet is set to RFID. (Of course, you can still start in parallel with the eCarUp app).
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)