Easee Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here
Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
1.ws Link without Basic Auth: Tested and works
2.wss without Basic Auth: Tested and works
3.wss with Basic Auth: Not tested
Go to the web interface of the desired station and paste the copied URL accordingly.
Using the following LINK you can in easee Enter the eCarUp URL directly into the web portal.
Open the link in your browser.
Select the desired location.
If the technical operator is not yet set up for smart-me/eCarUp, please confirm with YES.
Select and edit the charging robot.
Here you can enter the OCPP URL from your eCarUp account.
Save.
After approx. 15 minutes, the station will automatically appear in the eCarUp portal.
Note: The following variants work.
ws://www.ecarup.com/api/Ocpp16/4FEF6CFXXXXXX
wss://www.ecarup.com/api/Ocpp16/4FEF6CFXXXXXXX
4B49FXXXXXXX
Scan the QR code with your cell phone.
You will be redirected to your easee account.
There you can also select the desired location.
Add the eCarUp URL.
Save.
After about 15 minutes, the station will automatically appear in the eCarUp portal.
Note: The following variants work.
ws://www.ecarup.com/api/Ocpp16/4FEF6CFXXXXXX
wss://www.ecarup.com/api/Ocpp16/4FEF6CFXXXXXXX
4B49FXXXXXXX
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)