Bibus Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here
Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL accordingly.
The first steps must be taken directly on the display of your station:
Connect your laptop to the station
Take the current IP address of the station from the accompanying instructions
Then enter the IP address in the web browser
Circontrol dashboard appears
Select connection type (GSM, LAN ...)
⚠️ Please note:
The default setting of the Bibus station may be Plug & Charge. This must be deactivated in the Charge Point Manager.
Please contact BIBUS to get the Charge Point Manager.
There in the settings, status must be set to "Enabled"
Click Integration in the navigation on the left hand side
Choose OCPP 1.6J under "Available Integrations"
Click Link
Enter user name and password (found in the manual)
5. Give the Bibus Charge Box a name. ⚠️ Note: The name must not contain any spaces.
6. Enter the OCPP URL from your account under Central System
⚠️ Important: You must set the meter values sample interval (to e.g. 60 )
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)