Embedded Files
Backend Integration Guide
Backend Integration Guide
Mennekes Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here
Integration of OCPP stations
Integration of OCPP stations
Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL accordingly.
Integration of the Amedio Professional charging station & Amtron Professional wallbox
Integration of the Amedio Professional charging station & Amtron Professional wallbox
1. connect notebook to Bender Controller via USB cable
1. connect notebook to Bender Controller via USB cable
⚠️ Important: Use the micro USB interface
2. open the browser on the notebook
2. open the browser on the notebook
Enter the following URL: http://192.168.123.123/operator/
Default username: operator
Default Password: yellow_zone
3. check firmware version:
3. check firmware version:
At least version 4.00-2139 must be installed.
The latest version can be found under State -> Firmware Version.
Carry out firmware update:
a) Copy the firmware file to a USB stick. Insert the USB stick.
b) Restart the Bender Controller
4. configure Bender
4. configure Bender
OCPP Mode: OCPP-J 1.6
WebSocket JSON OCPP URL: ws://www.ecarup.com/api/Ocpp16/{ecarupID}/
Example: ws://www.ecarup.com/api/Ocpp16/D8D2AFE54EF4D508/
⚠️ Important: A ‘/’ must be added after the eCarUp OCPP URL (as shown in the example). In addition, the ‘ChargePoint ID (OCPP)’ must not contain any special characters.
Integration of the ACU V3 &V4
Integration of the ACU V3 &V4
Integration of the ACU controller
Integration of the ACU controller
Connect to the station with he ethernet
Laptop must have the following IP 192.168.0.21 and subnet mask: 255.255.255.0.
Open the browser of your laptop and enter the following URL in the address bar 192.168.0.10
Username and password are "admin"
Software updates and Mennekes manual:
Software updates and Mennekes manual:
The software including instructions can be downloaded from the Mennekes software updates page.
Mennekes web interface
Mennekes web interface
Check the firmware
If not up to date, please install the current version
Select transmission protocol v1.6J
Insert the OCPP URL from your account and add OCPP 1.6
ws: //www.ecarup.com/api/Ocpp16/ (your ID) /
Don't forget the slash at the end!
Note settings
Advanced setting via maintenance tool (eCarUp Premium)
Advanced setting via maintenance tool (eCarUp Premium)
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)
Page updated
Report abuse