Backend integration guide
Daze Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
- Prerequisite for integration via OCPP
- Configuration in the web portal for station operators
- Learn more about our premium functions here
Integration of OCPP stations:
Make sure that your charging stations are installed and that your computer or mobile phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the ‘Stations’ tab in the menu on the left-hand side.
Select the ‘OCPP’ tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL.
Integration of the Dazebox Home
Important: tested firmware version, 16.0.6.0
Install the Daze app.
Tested version of the app V. 6.1.0(97)
Step 1
Add a network.
Step 2
Configure your charging station at this point and add the WLAN.
Step 3
As soon as you have added the charging station, you will find the following overview
Step 4
For OCPP integration, click on the 3 dashes (settings) at the top right
Step 5
Activate OCPP and select eCarUp as provider.
Step 6
Now enter your URL from the web portal of the desired eCarUp account under URL.
Step 7
The charging station ID is filled in automatically.
Then click on Finish.
After restarting the station, it should now appear in your account.
Important: the station must be connected to your mobile phone via Bluetooth during the entire process.
Advanced setting via maintenance tool (eCarUp Premium)
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)