Embedded Files
Backend Integration Guide
Backend Integration Guide
Partino Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here
Integration of OCPP stations
Integration of OCPP stations
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Paste the URL in the application form mentioned below.
Ecotap
Ecotap
getestete Firmware Version 506.32R.33
OCPP URL an Partino übermitteln
OCPP URL an Partino übermitteln
Für die Integration der Partino Stationen in unser Backend brauchst du im Moment noch den Support durch die Firma Partino. Partino übernimmt den letzten Konfigurationsschritt und ordnet deine Ladepunkte dem richtigen eCarUp Account zu (per OCPP URL), welche du in der Vorbereitung erhalten hast. Übermittel dazu die URL sowie die Seriennummern der Ladestation Station mittels untenstehendem Formular an Partino zu.
Partino Vool
Partino Vool
tested firmware version v1.9.16
To do this, install the Vool app.
Connect station via Bluetooth
2.
3. Set up charger
4. Set up basic configuration
5. Click on ‘Show advanced settings’
6. Add Partino URL and save
Send eCarUp URL to Partino
Send eCarUp URL to Partino
To integrate Partino stations into our backend, you currently still need support from Partino. Partino will take care of the final configuration step and assign your charging points to the correct eCarUp account (via OCPP URL), which you received during the preparation phase. To do this, send the URL and the serial numbers of the charging station to Partino using the form below.
Advanced setting via maintenance tool (eCarUp Premium)
Advanced setting via maintenance tool (eCarUp Premium)
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)
Page updated
Report abuse