Backend Integration instructions
Mybox Stations can be integrated into the eCarUp billing system in just a few steps. Once installed in your account, you can easily define the conditions of use for your stations yourself (prices, users, available times, etc.). You decide who can charge, when and at what price.
Prerequisite for integration via OCPP
Configuration in the web portal for station operators
Learn more about our premium functions here
Integration of OCPP stations
Make sure that your charging stations are installed and that your computer or cell phone is connected to the same network as the charging station.
Open the eCarUp web portal and log in with your account details.
Click on the "Stations" tab in the menu on the left-hand side.
Select the "OCPP" tab.
Copy the URL to the clipboard.
Go to the web interface of the desired station and paste the copied URL accordingly.
Integration of the mybox
Tested firmware version: 20231218_1.209.4_v1
Preparation
To set up the wallbox, you must create a connection to the local Wi-Fi network of the charging station
Network name: MyBox-Rxx +8 characters (station ID)
Please take the login data as well as the IP address from the supplied operating instructions
⚠️ Important: In the event of an internal fault, the station does not send us the usual status message such as ‘Faulted’ or ‘Unavailable’.
Step 1
Go to the Advanced Settings
Under Authorisation, please select the OCPP mode
Step 2
Then activate the function under OCPP and enter your eCarUp URL under OCPP-URL-CS.
Step 3
Restart the station.
Advanced setting via maintenance tool (eCarUp Premium)
The upload interval of the Meter Values may vary from station to station.
We recommend an interval between 30-60s. This is the only way we can better calculate and display the current charging power on the app.
You can change this as follows:
Get Configuration (to read out what is programmed).
Change Configuration (to overwrite the value)