Here's what to say to the local authorities on the phone call:

Start by calmly stating the nature of the emergency:

• "Hello, I'd like to report a trespasser in my home."

Provide clear details:

• Briefly state your name and address.

• Mention that there is a homeless person currently inside your house who is unwilling to leave.

• If there's any immediate danger you feel, mention it - "I feel unsafe because..." (be specific if possible).

Express your desire for help:

• "I would like to request assistance in removing the trespasser from my property."

Be prepared to answer questions:

• The dispatcher might ask how the person entered your house or if you've had any prior interactions.

• Answer honestly but concisely.

Additional Tips:

• Stay calm and polite throughout the call.

• If you have any proof of ownership of the residence (like a lease agreement), have it ready in case they ask.

• Don't provide unnecessary details that might distract from the urgency.

Here's an example script you can adapt:

"Hello, I'd like to report a trespasser in my home at [Your Address]. There is a homeless person currently inside who is unwilling to leave. I feel unsafe because [briefly explain why, if applicable]. I would like to request assistance in removing the trespasser from my property."

Remember, your safety is the priority. If you feel threatened at any point, emphasize that to the dispatcher and ask for immediate police assistance.

Boarding up a window from the inside of a house with screws can be an effective way to secure the window from intruders or to protect against severe weather. Here are the steps to follow:

1. Measure the size of the window opening and cut a piece of plywood or wooden board to fit. It's best to use a board that's at least 1/2 inch thick to provide enough strength and stability.

2. Position the board over the window opening from the inside of the house, making sure it covers the entire opening. It's best to have another person help you hold the board in place while you work.

3. Use a pencil or marker to mark where you'll drill the screws into the board and into the window frame. Make sure to mark several points along the board to ensure it's securely attached.

4. Pre-drill holes into the board at the marked points using a drill bit slightly smaller than the screws you'll use. This will prevent the board from splitting when you insert the screws.

5. Hold the board in place and drill screws through the pre-drilled holes into the window frame. Use screws that are at least 2 inches long and thick enough to hold the board securely in place.

6. Continue drilling screws into the board and the window frame at all the marked points until the board is completely secured. Make sure to check that the board is level and tightly secured.

7. Once the board is attached, you can add additional screws or nails along the edges of the board for added security.

Boarding up a window from the inside with screws can be a good temporary solution, but it's important to note that it's not a permanent fix. If you're looking for a more long-term solution, consider installing impact-resistant windows or reinforcing the window frames.