LIST OF CONTACT PERSON DELIVERIES
Below are some option to contact for deliveries. Here's the link to Monday Map.
For Home Depot purchase info: Concrete & Mortar
Concrete should have fiber mixed in, regardless of if there is rebar in the pour.
For concrete patches in slabs, rebar should be drilled and epoxied into the slab to help support the patch pour.
The concrete should be level. This is especially true for new pours. The only exception is the slight grade that the concrete needs to divert water from the house.
When pouring concrete, always have a joint expander placed next to the item you are pouring against. Without this, the concrete will crack when the next winter comes.
Concrete should have a brushed finish.
Any contractor that pours concrete and uses a truck should have all excavation and forms layers BEFORE the concrete truck is called.
The concrete contractor is also responsible for removing concrete forms and cleaning spillage, demolition debris, and any other cleanup associated with the concrete job.
CONCRETE CALCULATOR: https://www.calculator.net/...p;slabcal=Calculate
WHEN POURING SIDEWALKS MAKE SURE TO COVER the pour with plywood so that people DO NOT WALK THROUGH the newly poured concrete. Nail the plywood into the ground around the pour with a gutter spike to keep secure.
TYPE OS CONCRETE CRACKS
If you are in a pinch and don't have a concrete vibrator, you can use a hammer drill to vibrate the form of the concrete to get the bubbles out.
Take a hammer drill, put it on the hammer setting, and vibrate the form.
All concrete needs to be adequately vibrated so that air bubbles are removed. The improper vibration of concrete will lead mortar to leak through the frameworks and leaves the aggregates to settle down, this will cause "honeycombs" in concrete.
Honeycombs are hollow spaces and cavities left in concrete mass on the surface or inside the concrete mass where concrete could not reach. These look like honey bee nests. The surface looks very rough with voids and gaps between concrete and the reinforcement
CONCRETE VIBRATOR
This video shows how weird and amazing a concrete vibrator can be. Watch to learn more.
The importance of vibrating concrete after the pour
Watch the video below to check out what happens when vibrating concrete.
NOTE: All slabs and sidewalk pads should be 4” and that foundations need to be at least 2’ deep.
Below Video shows how to Work Smart in Mixing Cement
When pouring concrete in a slab where you've replaced a sewer line- it's always good to drill rebar into the area you're pouring the slab in.
I love to fill the holes the rebar is in with concrete epoxy, too.
SLABS
Here's the link to know more: https://crackstitch.com/
How to properly repair slab
This video shows how to properly repair slab
This video shows how to fix a chip-off concrete.
Watch this animation for the proper procedure to insulate a monolithic slab.
FOUNDATION
How to fix a foundation crack.
This video show how to fix a foundation crack.
ASPHALT PATCH
Asphalt patch is a process of repairing damaged or deteriorated areas on an asphalt surface by filling them with new asphalt material. It involves cutting out the damaged area to the appropriate shape and depth, cleaning the surface of any debris, and then filling the area with hot or cold asphalt mix. The patch is then compacted and smoothed out to blend in with the surrounding asphalt. Asphalt patching is commonly used to repair potholes, cracks, and other types of damage to asphalt pavements, such as roads, parking lots, and driveways. Properly executed asphalt patching can extend the life of the asphalt surface, improve safety, and provide a smooth driving surface.
USING CAULK IN CONCRETE REPAIR
Note: Use sand on top of the caulk to help blend to the texture of the concrete, and to protect the caulk from UV rays. (watch til the end for uv ray information)
CONCRETE LEVELING
The A-1 Concrete Leveling Lexington process for leveling concrete, sometimes called mudjacking, allows us to return uneven concrete to its original level position without the cost of pouring new concrete. At it's simplest form, we fill any void under your slab with a slurry mixture which in turn lifts the concrete in place. It is safe and effective for many applications and in most cases can be completed in a matter of hours instead of days for new concrete.
Small holes (1 inch diameter) are drilled through the sunken concrete block at strategic locations.
A finely crushed, highly dense limestone aggregate (sometimes combined with Portland cement), is combined with water in a “slurry” consistency then pumped into the holes. Once any voids, created by erosion or soil compaction, have been filled, the block will begin to rise. As the slurry begins to flow under the slab, it exerts an even pressure across the entire slab and can easily raise the concrete. Through strategic placement of the drilled holes, and control of the amount of material injected into each, the block will be carefully raised into final position.
During the last step, the holes are filled with non-shrinking grout leaving the slab looking nearly new.
Common Concrete Leveling/Mudjacking applications include: sidewalks, patios, pools, driveways, steps, porches, garage floors, and interior slabs.
A-1 Concrete Leveling of Lexington can save you up to 80% over the cost of tearing out and replacing your concrete.
This video shows how concrete levelling is done.
Strip out a Topcon in Concrete
This video show a hack when stripping out a Topcon in concrete.