HOW-TO MANUAL

DRIVEWAYS

Generally, driveways need a little repair.

Gravel: Make sure they have an appropriate grade and are free of weeds and grass- we DO NOT use any barrier under them because they will eventually fail, and vegetation will grow through them. The best thing to do is to use a combination of a tablespoon of dishwashing liquid, Crossbow, and Glyphosate (go to Ryan’s Agricultural Sales on Versailles Rd) in a 2.5 Gallon stainless sprayer. Spray on all vegetation, and recoat in a few days. It will kill all green things.

Asphalt: Generally, most asphalt can be salvaged. If there is damage, contact Cloud Seal at (859) 523-7325. Note the before and after repairs can do.

ASPHALT DRIVEWAY REPAIR

Note: Notify the occupants that work will be going on, as well as a time frame for it happening

CLEANING AND PREPATION

Here are some tips on cleaning and preparing an asphalt driveway for repair:

Remove any debris from the surface of the driveway. This includes leaves, dirt, gravel, and any other loose materials. You can use a broom, leaf blower, or pressure washer to remove the debris.
Clean any cracks or potholes in the driveway. You can use a wire brush or a screwdriver to clean out the cracks and potholes. If there is any oil or grease in the cracks, you can use a degreaser to clean it up.
Apply a cleaning solution to the driveway. You can use a commercial driveway cleaner or a mixture of dish soap and water. Apply the cleaning solution to the driveway with a hose or a sprayer.
Scrub the driveway with a brush. Use a stiff-bristled brush to scrub the driveway. Be sure to scrub into the cracks and potholes.
Rinse the driveway with water. Use a hose to rinse the driveway thoroughly. Be sure to rinse away all of the cleaning solution.
Allow the driveway to dry completely. The driveway should be dry before you start repairing it.

Once the driveway is clean and dry, you can start repairing the damaged areas. Be sure to follow the instructions on the repair product label.

REMOVING LOOSE CONCRETE/PAVEMENT

Removing loose concrete or pavement in asphalt driveway repair can be a challenging task, but it is important to do it correctly in order to ensure a long-lasting repair. Here are some tips on how to remove loose concrete or pavement in asphalt driveway repair:

Identify the loose concrete or pavement. The first step is to identify the loose concrete or pavement that needs to be removed. This can be done by looking for areas that are cracked, crumbling, or otherwise damaged.
Prepare the area. Once you have identified the loose concrete or pavement, you will need to prepare the area for removal. This includes removing any debris from the area and making sure that the area is dry.

PATCHING PAVEMENT/CONCRETE AND FILLING

Here are some tips on patching pavement/concrete in asphalt driveway repair:

Apply a bonding agent. A bonding agent will help the patch material to adhere to the asphalt. Apply the bonding agent according to the product instructions.
Apply the patch material. Apply the patch material according to the product instructions. Be sure to smooth out the patch material so that it is level with the surrounding asphalt.
Compact the patch material. Use a tamper or a roller to compact the patch material. This will help to ensure that the patch material is properly adhered to the asphalt.
Allow the patch to cure. The patch material will need to cure for several hours before it is ready to be used.

SEALING

Apply the sealer. The sealer can be applied by brush, roller, or sprayer. Be sure to apply the sealer evenly and to the entire surface of the driveway.
Allow the sealer to dry. The sealer will need to dry for several hours before it is ready to be used.

Here are some additional tips for sealing an asphalt driveway:

Seal the driveway in the spring or fall. This will help to prevent the sealer from being damaged by extreme heat or cold.
Do not seal the driveway if it is wet or icy. The sealer will not adhere properly if the surface is wet or icy.

STRIPPING (if needed for parking spaces)

Asphalt stripping is essentially asphalt raveling in reverse. Instead of the surface coming apart and disintegrating, exposing the lower layers, the lower layers of the asphalt fall apart first and damage the upper layers.

Sure, here are some tips on stripping an asphalt driveway:

Inspect the driveway. Before you start stripping, you need to inspect the driveway to see how bad the stripping is. If the stripping is only superficial, you may be able to get away with spot-stripping. However, if the stripping is extensive, you may need to strip the entire driveway.
Choose the right stripper. There are a variety of asphalt strippers available, so it is important to choose the right one for the job. For most driveways, a solvent-based stripper will be sufficient. However, if your driveway is in a severe climate, you may need to use a more aggressive stripper, such as a caustic-based stripper.
Prepare the driveway. The driveway should be clean and dry before you apply the stripper. If there is any dirt, debris, or oil on the driveway, it will prevent the stripper from working properly.
Apply the stripper. The stripper can be applied by brush, roller, or sprayer. Be sure to apply the stripper evenly and to the entire surface of the driveway.

5. Let the stripper work. The stripper will need to work for several hours before it will start to break down the asphalt.

6. Remove the old asphalt. Once the stripper has worked its way into the asphalt, you can start to remove the old asphalt. You can use a variety of tools to remove the old asphalt, such as a heat gun, a pressure washer, or a chipping hammer.

7. Clean up the area. Once you have removed the old asphalt, you need to clean up the area. This includes removing any debris and making sure that the area is dry.

8. Reseal the driveway. Once the area is clean, you can reseal the driveway. This will help to protect the driveway and extend its lifespan

Blocking off the area so people don't drive on for 24 hours.

Page updated

Report abuse