How to Get Rid of Mold

It is very important to know how to clean mold from every surface of your home. The key is to remove the mold before it spreads and becomes a bigger problem. Left unchecked, it can rot wood surfaces and cause indoor pollutants that can lead to health issues.

This guide will help you learn how to get rid of mold with cleaning tools and methods that can remove stains and the health hazards that mold presents.

Tip: Run the bathroom fan or open the window when you take a shower to prevent mold from growing. Same in the kitchen, use exhaust fans or open the window when you do the dishes.

HUMIDITY-CONTROLLED FAN/ FOUNDATION VENTS

We need to seal up the foundation vents that these are not stalled in.

When foaming a crawl space, ensure that an electronic humidity-controlled fan is installed. This ensures that it can get out if moisture gets into the crawl space.

Running a dehumidifier will reduce the overall moisture level in the house and can also keep molds from growing.

The humidity-controlled fan should be set at 50% humidity.

Conditioned air supply sized to deliver at a rate equal to 1 cubic foot per minute (0.47 L/s) for each 50 square feet (4.7 m2) of under-floor area, including a return air pathway to the common area (such as a duct or transfer grille), and perimeter walls insulated.

Additionally, make sure that there is a vent from the HVAC in the crawl space to help condition the air.

MOLD BOMB

Link to Amazon: Cleaning supplies

MOLD BOMB a type of fogger that targets fine particles rather than mold itself.

Here's a breakdown of what a Mold Bomb is and what it does:

Not a mold killer: While the name implies it eliminates mold, the Mold Bomb Fogger is intended to bring down small particles like dust and mold spores onto surfaces where they can be cleaned.
Fogger: It works by dispersing a fog throughout a room.
Targets small particles: This fog helps clumps tiny particles like dust, allergens, and even mold spores, making them easier to clean up with wipes or a vacuum cleaner.

Mold Armor Rapid Clean Remediation, 1 Gallon; Kills, Cleans & Prevents Mold & Mildew

NOTE: This is not for wood and drywall

Product link to Amazon: Mold Armor Rapid Clean Remediation

To use Mold Armor Rapid Clean Remediation effectively, follow these steps:

Materials Needed:

Mold Armor Rapid Clean Remediation, 1 Gallon
Protective gear (gloves, mask, safety goggles)
Scrubbing brush or sponge
Cloth or mop
Bucket (if diluting)

Instructions:

Preparation:
- Wear protective gear to avoid skin contact and inhalation of fumes.
- Ensure the area is well-ventilated.
Application:
- Shake the bottle well before use.
- For heavy mold and mildew, apply the product undiluted directly to the affected area. For lighter mold and mildew, dilute the product with water as directed on the label.
- Use a sponge or brush to scrub the affected area thoroughly.
- Allow the solution to sit for at least 10 minutes to ensure it penetrates and kills the mold and mildew.
Cleaning:
- After allowing the product to sit, scrub the area again to remove the mold and mildew completely.
- Wipe the area clean with a cloth or rinse with water if necessary.
- For large areas, a mop can be used for cleaning and rinsing.
Prevention:
- To prevent mold and mildew from returning, apply a thin layer of Mold Armor Rapid Clean Remediation to the cleaned surface and allow it to air dry.
- Repeat the application every few months or as needed to maintain mold and mildew prevention.

Safety Precautions:

Always use the product in a well-ventilated area.
Keep the product out of reach of children and pets.
Avoid contact with skin and eyes; rinse thoroughly with water if contact occurs.
Do not mix with other household chemicals.

By following these steps, you can effectively kill, clean, and prevent mold and mildew using Mold Armor Rapid Clean Remediation.

RMR-86 Pro Contractor Grade Mold Stain & Mildew Stain Remover and RMR Botanical Disinfectant Cleaner Mold Remover Bundle

NOTE: This is for wood and drywall

Product link to Amazon: RMR-86 Pro Contractor Grade Mold Stain & Mildew Stain Remover and RMR Botanical Disinfectant Cleaner Mold Remover Bundle

About this item

DISINFECTANT CLEANER AND CONTRACTOR GRADE MOLD STAIN REMOVER: Our EPA certified disinfectant combined with our professional mold stain remover
EPA CERTIFIED DISINFECTANT CLEANER: You can feel great knowing you’re using RMR’s Earth-conscious, all natural disinfectant cleaner, with a modern citrus scent, made completely from organic plant-based ingredients
TACKLES TOUGH MOLD STAINS INSTANTLY: RMR-86 PRO is our most powerful mold stain remover that utilizes special deep penetrating surfactants with a unique hybrid of pure sodium hypochlorite to remove stubborn stains in just seconds.
CONTRACTOR GRADE: Our extra strength stain removal solution is specifically created for professional use and is 5x stronger than other stain removal products on the market
RINSE-FREE, STREAK-FREE FORMULA: Our formula is ready to use and requires absolutely zero rinsing, scrubbing, or wiping - simply spray onto any porous or hard surface and watch the cleaning magic happen!

Here's a step-by-step guide on how to use the RMR-86 Pro Contractor Grade Mold Stain & Mildew Stain Remover and RMR Botanical Disinfectant Cleaner Mold Remover Bundle:

RMR-86 Pro Contractor Grade Mold Stain & Mildew Stain Remover

Safety Precautions:

Wear protective gear: gloves, safety goggles, and a mask.
Ensure the area is well-ventilated.

Application:

Preparation:
- Shake the bottle well before use.
- Cover any plants or surfaces you do not want to be affected by overspray.
Testing:
- Test a small, inconspicuous area first to ensure it does not cause discoloration or damage.
Application:
- Spray directly onto the mold or mildew stains. Hold the sprayer about 12 inches away from the surface.
- Do not oversaturate the surface; a light mist should be sufficient.
- Allow the product to sit and work. You should see stains disappear within a few seconds to a few minutes.
Cleanup:
- Wipe off the residue with a damp cloth or sponge.
- For heavy stains, a second application may be necessary.
Final Steps:
- Rinse the treated area with water if necessary.
- Dispose of any used cleaning materials according to local regulations.

RMR Botanical Disinfectant Cleaner Mold Remover

Safety Precautions:

Although this product is botanical and less harsh, it is still advisable to wear gloves and ensure proper ventilation.

Application:

Preparation:
- Shake the bottle well before use.
Testing:
- Test a small, inconspicuous area to ensure compatibility with the surface.
Application:
- Spray directly onto the surface until it is visibly wet.
- Ensure full coverage for effective disinfection.
Dwell Time:
- Allow the product to remain on the surface for at least 10 minutes. This ensures effective disinfection and mold removal.
Cleaning:
- Wipe the surface with a clean cloth or sponge.
- No rinsing is required unless the surface will come into contact with food.
Final Steps:
- Allow the surface to air dry.
- Dispose of any used cleaning materials properly.

Additional Tips

Always read and follow the manufacturer's instructions on the label.
Store the products in a cool, dry place out of reach of children and pets.
Regularly inspect and clean areas prone to mold and mildew to prevent reoccurrence.

Following these steps will help you effectively use the RMR-86 Pro and RMR Botanical Disinfectant Cleaner for mold and mildew removal.

Page updated

Report abuse