Hazardous Waste Deposit

1. Find a new bottle that can be used for new hazardous waste material. To label it, get one of the yellow Hazardous Waste stickers from on top of the metal cabinet out by the elevator. Label it with the same materials along with today's date.

2. Make sure your current bottle is not filled to the brim; if it is, then pour some into your new hazardous waste bottle.

3. Print out the following sheet and fill it out with the same information as the old bottle EXCEPT put today's date instead of the bottle's start date.

Hazardous Waste Labels (red): https://docs.google.com/document/d/1SOvuorsqLHgnjJmK7YLiX7F_DOiYESzm/edit

4. When taping this onto the old bottle, make sure you cover the yellow sticker.

5. Fill out this form:

Hazardous Waste Deposit Form: https://docs.google.com/document/d/1rbifjOFgTu1dypTegJrEgLUdvIJg0qyi/edit

Example Form: https://docs.google.com/document/d/1G4wmjkWsWGLpefDhDUlGaU8kxS9v9Qg0/edit

6. Attach this form along with the SDS (safety data sheets) for each of the waste materials in an email addressed to hmmc@atsu.edu

Ethanol Waste: attach SDS for Ethanol and Sodium Acetate

PCI: attach SDS for Chloroform and Phenol Chloroform

**Let them know that you will be depositing hazardous waste in TBR Room 6 for pickup and that you will be attaching the deposit form as well as SDS for the materials to the email.

7. Grab the basement key and take your waste bottle to the basement. You will be going into the same room the big autoclave is in. There is another room attached in which you will take your waste bottle and drop it off.