Here are my TeleWell TW-EAV510 v2 settings.
Description
Wired and wireless ADSL2+ / VDSL2 modem (RJ11). IPv4. IPv6.
Change settings
Go to: http://192.168.0.254/
Device Info
Summary
Model Name: TW-EAV510 v2
Software Version: 5.00.41 (9/2014)
Default Gateway: ptm0.1
Primary DNS Server: 109.204.194.2
Secondary DNS Server: 109.204.194.3
WAN
atm0.1
Description: ipoe_0_0_33
Type: IPoE
VlanMuxId: Disabled
IPv6: Disabled
Igmp Pxy: Enabled
Igmp Src Enbl: Enabled
MLD Pxy: Disabled
MLD Src Enbl: Disabled
NAT: Enabled
Firewall: Enabled
Status: Unconfigured
atm1.1
Description: ipoe_0_0_100
Type: IPoE
VlanMuxId: Disabled
IPv6: Disabled
Igmp Pxy: Enabled
Igmp Src Enbl: Enabled
MLD Pxy: Disabled
MLD Src Enbl: Disabled
NAT: Enabled
Firewall: Enabled
Status: Unconfigured
atm2.2
Description: ipoe_0_0_35
Type: IPoE
VlanMuxId: Disabled
IPv6: Disabled
Igmp Pxy: Enabled
Igmp Src Enbl: Enabled
MLD Pxy: Disabled
MLD Src Enbl: Disabled
NAT: Enabled
Firewall: Enabled
Status: Unconfigured
ptm0.1 (modem, PTM framing)
Description: ipoe_0_1_1
Type: IPoE
VlanMuxId: Disabled
IPv6: Disabled
Igmp Pxy: Enabled
Igmp Src Enbl: Enabled
MLD Pxy: Disabled
MLD Src Enbl: Disabled
NAT: Enabled
Firewall: Enabled
Status: Connected
ptm0.3
Description: ipoe_0_1_1.252
Type: IPoE
VlanMuxId: 252
IPv6: Disabled
Igmp Pxy: Enabled
Igmp Src Enbl: Enabled
MLD Pxy: Disabled
MLD Src Enbl: Disabled
NAT: Enabled
Firewall: Enabled
Status: Connecting
usbo3g0 (3G/LTE)
Description: 3G_LTE0
Type: Direct
VlanMuxId: Disabled
IPv6: Disabled
Igmp Pxy: Disabled
Igmp Src Enbl: Disabled
MLD Pxy: Disabled
MLD Src Enbl: Disabled
NAT: Enabled
Firewall: Enabled
Status: Card Not Found
pppo3g0 (3G/LTE)
Description: 3G_LTE0
Type: PPP
VlanMuxId: Disabled
IPv6: Disabled
Igmp Pxy: Disabled
Igmp Src Enbl: Disabled
MLD Pxy: Disabled
MLD Src Enbl: Disabled
NAT: Enabled
Firewall: Enabled
Status: Card Not Found
3G/LTE Info
Status: Card Not Found
Statistics
LAN
LAN2 (Mac Pro)
LAN3
LAN1 (game console)
LAN4
TH_NET5
xDSL
Mode: VDSL2
Traffic Type: PTM
Status: Up
Link Power State: L0
ARP
IP Address: 192.168.0.102 (Samsung A3)
Flags: Complete
Device: br0
IP Address: 192.168.0.100 (iPhone 6)
Flags: Complete
Device: br0
IP Address: 192.168.0.104 (Mac Pro)
Flags: Complete
Device: br0
IP Address: 192.168.0.103 (Nexus 7)
Flags: Complete
Device: br0
IP Address: 109.204...
Flags: Complete
Device: ptm0.1 (modem)
DHCP
Hostname: XboxOne-...
IP Address: 192.168.0.101
Expires In: 21 hours, 28 minutes, 51 seconds
Hostname: android-... (Samsung A3)
IP Address: 192.168.0.102
Expires In: 21 hours, 31 minutes, 16 seconds
Hostname: android-... (Nexus 7)
IP Address: 192.168.0.103
Expires In: 21 hours, 31 minutes, 16 seconds
Hostname: iPhone-...
IP Address: 192.168.0.100
Expires In: 21 hours, 52 minutes, 48 seconds
Hostname: Mac-Pro-...
IP Address: 192.168.0.104
Expires In: 22 hours, 56 minutes, 13 seconds
System Log
Facility: kern (power on, USB)
Severity: info
Message: kernel: usbcore: registered new interface driver abc_123_...
Facility: kern (power on, USB)
Severity: info
Message: kernel: usbcore: registered new interface driver lc_cdc_ecm
Facility: kern (power on, USB)
Severity: info
Message: kernel: usbcore: registered new interface driver cdc_wdm
Facility: kern (power on)
Severity: crit
Message: kernel: eth0 (Int switch port: 0) (Logical Port: 0) Link UP 10 mbps full duplex
Facility: kern (power saving)
Severity: warn
Message: kernel: Energy Efficient Ethernet: Enabled
Facility: kern (power saving)
Severity: warn
Message: kernel: Host MIPS Clock divider pwrsaving is enabled
Facility: kern (power saving)
Severity: warn
Message: kernel: DDR Self Refresh pwrsaving is enabled
Facility: kern (power saving)
Severity: warn
Message: kernel: Ethernet Auto Power Down and Sleep: Disabled
Facility: kern (power saving)
Severity: warn
Message: kernel: Energy Efficient Ethernet changed to disabled
Facility: kern (connecting)
Severity: crit
Message: kernel: Line 0: VDSL2 link up, Bearer 0, us=..., ds=...
Facility: kern (connecting)
Severity: warn
Message: kernel: ptm0.1 MAC address set to ...
Facility: daemon (connecting)
Severity: err
Message: syslog: dhcpc:udhcp client (v0.9.6) started
Facility: daemon (connecting)
Severity: err
Message: syslog: dhcpc:Lease of 109.204... obtained, lease time 14400
Facility: kern (connecting)
Severity: crit
Message: kernel: eth3 (Int switch port: 3) (Logical Port: 3) Link UP 100 mbps full duplex
Facility: kern (connecting)
Severity: info
Message: kernel: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
Facility: kern (connecting)
Severity: info
Message: kernel: br0: port 3(eth3) entered forwarding state
Facility: kern (Apple Push Notification Service / ISP: Korea Telecom / no reports in AbuseIPDB)
Severity: alert
Message: kernel: Intrusion -> IN=ptm0.1 OUT= MAC=... SRC=14.42.229.146 DST=109.204... LEN=40 TOS=0x00 PREC=0x00 TTL=239 ID=2196 PROTO=
Facility: kern (could be a trojan / ISP: LogicWeb Inc, USA / reported 33 times in AbuseIPDB)
Severity: alert
Message: kernel: Intrusion -> IN=ptm0.1 OUT= MAC=... SRC=196.52.43.59 DST=109.204... LEN=40 TOS=0x00 PREC=0x00 TTL=246 ID=54321 PROTO=
Facility: kern (unknown port / ISP: Alibaba, Canada / reported 1 time in AbuseIPDB)
Severity: alert
Message: kernel: Intrusion -> IN=ptm0.1 OUT= MAC=... SRC=47.89.183.92 DST=109.204... LEN=52 TOS=0x00 PREC=0x00 TTL=118 ID=20831 DF PRO
Facility: kern (unknown port / ISP: CariNet, USA / reported 577 times in AbuseIPDB)
Severity: alert
Message: kernel: Intrusion -> IN=ptm0.1 OUT= MAC=... SRC=71.6.146.185 DST=109.204... LEN=40 TOS=0x00 PREC=0x00 TTL=110 ID=9537 PROTO=T
Facility: kern (unknown port / ISP: Korea Telecom / reported 1 time in AbuseIPDB)
Severity: alert
Message: kernel: Intrusion -> IN=ptm0.1 OUT= MAC=... SRC=175.205.119.31 DST=109.204... LEN=40 TOS=0x00 PREC=0x00 TTL=242 ID=12654 PROT
Facility: kern (unknown port / ISP: Cyber Info Provedor de Internet, Brazil / no reports in AbuseIPDB)
Severity: alert
Message: kernel: Intrusion -> IN=ptm0.1 OUT= MAC=... SRC=177.21.39.138 DST=109.204... LEN=44 TOS=0x00 PREC=0x00 TTL=238 ID=23133 PROTO
Advanced Setup
Layer2 Interface
ATM Interface
atm0
VPI: 0
VCI: 33
DSL Latency: Path0
Category: UBR
atm1
VPI: 0
VCI: 100
DSL Latency: Path0
Category: UBR
atm2
VPI: 0
VCI: 35
DSL Latency: Path0
Category: UBR
3G/LTE
Dialup Number: *99#
APN Code: internet
Authentication Method: AUTO
MTU: 1360
[x] NAT
[x] Firewall
Extra AT Command: AT
LAN
[x] Enable IGMP Snooping
(*) Blocking Mode
(*) Enable DHCP Server
Quality of Service
[x] Enable QoS
DSL
Modulation
[x] G.Dmt
[x] G.lite
[x] T1.413
[x] ADSL2
[x] AnnexL
[x] ADSL2+
[x] AnnexM
[x] VDSL2
Profile
[x] 8a
[x] 8b
[x] 8c
[x] 8d
[x] 12a
[x] 12b
[x] 17a
SNR
SNR: [7] dB (Auto: -1)
UPnP
[ ] UPnP
DNS Proxy
[x] DNS Proxy
Print Server
[ ] on-board print server
DLNA
[ ] on-board digital media server
Interface Grouping
WAN Interface / LAN Interface
atm0.1 / LAN2 (Mac Pro)
atm1.1 / LAN3
ptm0.1 / LAN4
atm2.2 / LAN1 (game console)
ptm0.3 / TH_NET5
Power Management
[x] MIPS CPU Clock divider when Idle
[x] Wait instruction when Idle
[x] DRAM Self Refresh
[ ] Energy Efficient Ethernet
[ ] Ethernet Auto Power Down and Sleep
Multicast
Multicast Precedence: [Disable]
IGMP Configuration
Default Version: [2]
Query Interval: [60]
Query Response Interval: [4]
Last Member Query Interval: [4]
Robustness Value: [45]
Maximum Multicast Groups: [25]
Maximum Multicast Data Sources (for IGMPv3): [10]
Maximum Multicast Group Members: [25]
[x] Fast Leave
MLD Configuration
Default Version: [2]
Query Interval: [125]
Query Response Interval: [10]
Last Member Query Interval: [10]
Robustness Value: [2]
Maximum Multicast Groups: [10]
Maximum Multicast Data Sources (for mldv2): [10]
Maximum Multicast Group Members: [10]
[ ] Fast Leave
Wireless
Basic
[x] Enable Wireless
[ ] Enable Wireless Hotspot2.0
[ ] Hide Access Point
[ ] Clients Isolation
[ ] Disable WMM Advertise
[x] Enable Wireless Multicast Forwarding (WMF)
SSID: [TH_NET5]
Country: [Finland]
Country RegRev: [0]
Max Clients: [64]
Security
[x] WPS
Advanced
Band: [2.4GHz]
Channel (you can't choose channel 11 which seems to be the best option for MacBook Pro)
[9] (2014–2017, until too many users had the same channel)
[3] (8/2017–)
Auto Channel Timer(min): [0]
802.11n/EWC: [Auto]
Bandwidth: [20MHz / 40MHz]
Control Sideband: [Lower]
802.11n Rate: [Auto]
802.11n Protection: [Auto]
Support 802.11n Client Only: [Off]
RIFS Advertisement: [Auto]
OBSS Coexistence: [Enable]
RX Chain Power Save: [Disable]
ARX Chain Power Save Quiet Time: [10]
RX Chain Power Save PPS: [10]
54g Rate: [1 Mbps]
Multicast Rate: [Auto]
Basic Rate: [Default]
Fragmentation Threshold: [2346]
RTS Threshold: [2347]
DTIM Interval: [1]
Beacon Interval: [100]
Global Max Clients: [64]
XPress Technology: [Disabled]
Transmit Power: [100%]
WMM (Wi-Fi Multimedia): [Enabled]
WMM No Acknowledgement: [Disabled]
WMM APSD: [Enabled]
Beamforming Transmission (BFR): [Disabled]
Beamforming Reception (BFE): [Disabled]
Diagnostics
Diagnostics
LAN2: PASS
LAN3: FAIL (the Ethernet cable was not connected to any device or the device was shut down)
LAN1: PASS
LAN4: PASS
Wireless Connection: PASS
xDSL Synchronization: PASS
ATM OAM F5 segment ping: DISABLED
ATM OAM F5 end-to-end ping: DISABLED
Ping default gateway: FAIL
Ping primary Domain Name Server: PASS
Management
Internet Time
[x] Automatically synchronize with Internet time servers
NTP 1: [ntp.inet.fi]
NTP 2: [ntp.elisa.fi]
NTP 3: [1.fi.pool.ntp.org]
NTP 4: [ntp.tdc.fi]
NTP 5: [ntp1.tummy.com]
Time zone offset: [ (GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius ]
Languages
Select Language: [English]
Last modified: October 14th, 2021
Author: Tomi Häsä (tomi.hasa@gmail.com)
URL: http://sites.google.com/site/tomihasa/telewell-eav510-settings